Electrical Engineers For Hire

  • Electrical Engineering
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

Showing 208 results
  • Hire     avigupta0061
Hire     avigupta0061

    avigupta0061 avigupta0061

    India $30 USD / hour
    Circuit Design | PCB Design | Prototyping | Review
    India
    7.4
    46 reviews 46 reviews $30 USD per hour
    Idea To Reality! We are an exclusive team of techno-commercials who provide 10X value delivering robust and reliable products while saving your expenditure by 15X. With more than 15 years of industry experience in designing hardware Electronics (Circuit Design, PCB Design, BOM etc), we are the best rated freelancers...
    Idea To Reality! We are an exclusive team of techno-commercials who provide 10X value delivering robust and reliable products while saving your expenditure by 15X. With more than 15 years of industry experience in designing hardware Electronics (Circuit Design, PCB Design, BOM etc), we are the best rated freelancers and come in the top 1% of this platform 1. Schematic Capture/Circuit design 2. PCB Design and Layout 3. High Speed Multilayer PCB design 4. Lowest Cost BoM Design 5. PCB Prototyping And Assembly 4. DFM and DFA compliant design 5. EMI EMC Compliant design 6. Firmware Development 7. Tools- ALTIUM, EAGLE, KICAD, CADENCE, PROTEUS, ORCAD, What you will get by hiring us 1. Free of cost consultation. 2. Robust, Reliable and Quality Product Design 3. 100% Customer Satisfaction 4. 24X7 Live support 5. Proactive team making things happen for you 6. Zero defect Product Message us for a wonderful experience in product development like many clients experienced :) less
  • Hire avigupta0061
  • Hire     Lightcanon
Hire     Lightcanon

    Lightcanon Lightcanon

    Egypt $30 USD / hour
    Communications & Digital Electronics Engineer
    Egypt
    6.7
    90 reviews 90 reviews $30 USD per hour
    Digital & Analog Electronics VHDL-Verilog-System verilog Matlab/Simulink Analog and Digital Communications Python C/ C++/C# Micro-controllers Data Structures OOP Qt/ PyQt OpenCV x86 assembly
    Digital & Analog Electronics VHDL-Verilog-System verilog Matlab/Simulink Analog and Digital Communications Python C/ C++/C# Micro-controllers Data Structures OOP Qt/ PyQt OpenCV x86 assembly less
  • Hire Lightcanon
  • Hire     DeepNetMatlab
Hire     DeepNetMatlab

    DeepNetMatlab DeepNetMatlab

    Turkey $20 USD / hour
    Biomedical Signal Processing, ML and DL Expert
    Turkey
    5.6
    35 reviews 35 reviews $20 USD per hour
    I'm an electircal engineer and PhD student. I am specialized in but not limited to: - Matlab, Python, Numpy, Pandas, Scikit-learn, TensorFlow, Keras, Data science - Digital signal processing - Biomedical signal (EEG, ECG, EMG, etc) processing - Pre-processing signals for machine learning algorithm ...
    I'm an electircal engineer and PhD student. I am specialized in but not limited to: - Matlab, Python, Numpy, Pandas, Scikit-learn, TensorFlow, Keras, Data science - Digital signal processing - Biomedical signal (EEG, ECG, EMG, etc) processing - Pre-processing signals for machine learning algorithm - Features extraction for machine learning algorithm - Classification with k nearest neighbor (kNN) - Classification, regression, modeling and prediction with Artificial neural network (ANN) - Classification, regression, modeling and prediction with Support vector machines (SVM) - Image/signal transformation and representation for deep learn. ing algorithms - Image to label classification with CNN - Image to image regression with CNN - Object detection with R-CNN, fast R-CNN, faster R-CNN and YOLO - Image denoising with DnCNN - Image generation with GAN and VAE and etc. - Time series prediction with LSTM - Sequence to label classification with LSTM - Sequence to sequence classification with LSTM less
  • Hire DeepNetMatlab
  • Hire     binyameen441
Hire     binyameen441

    binyameen441 binyameen441

    Pakistan $13 USD / hour
    Electrical/Electronics Engineer
    Pakistan
    7.0
    156 reviews 156 reviews $13 USD per hour
    ✋ Hi! I am an Electrical/Electronics Engineer. I am expert in ✅ Professional PCB design( EAGLE, ALTIUM, easyEDA, PROTEUS, KICAD) ✅ Arduino/ Microcontroller(Arduino IDE, Platform IO, MPLAB, MIKROCHIP, ETC) ✅ TFT and Touch screen designs (Nextion, Visual designer, Nuritake, layout designer) ✅...
    ✋ Hi! I am an Electrical/Electronics Engineer. I am expert in ✅ Professional PCB design( EAGLE, ALTIUM, easyEDA, PROTEUS, KICAD) ✅ Arduino/ Microcontroller(Arduino IDE, Platform IO, MPLAB, MIKROCHIP, ETC) ✅ TFT and Touch screen designs (Nextion, Visual designer, Nuritake, layout designer) ✅ MATLAB/Simulink ✅ IOT Technologies (BLE, Wi-Fi, RF, GSM, GPS, ESP32/ESP8266, STM32, MQTT, BLYNK, CODE BLOCKS) ✅ Mobile App Development( IOS, Android) ✅ CIRCUIT SIMULATION (Pspice/LTspice/Proteus/Multisim) ✅ C++/C/Java/Python/Php ✅ 3D Designs (AutoCAD/ Solid works/FUSION 360) ✅ MATHS /DIGITAL ELECTRONICS expert I am very experienced and I am sure you will be satisfied with my work. So please reach out to me so that we can discuss your project in greater detail! less
  • Hire binyameen441
  • Hire     Hayat87
Hire     Hayat87

    Hayat87 Hayat87

    Pakistan $15 USD / hour
    MEP-Architecture-Estimation-BIM-2D,3D MODELING
    Pakistan
    5.8
    14 reviews 14 reviews $15 USD per hour
    "بِسْمِ ٱللَّٰهِ ٱلرَّحْمَٰنِ ٱلرَّحِيمِ" >>>Software expert<<< 1. AutoCAD 2. Autodesk Revit 3. MS Office, Excel 4. PowerPoint 5. Primavera P6 6. Macquay Software (duct and pipe sizing) 7. HAP (HVAC Load Calculation) 8. Adobe Photoshop & Illustrator. 9. Solidworks >>>Services offered<<< 1. Architecture/House...
    "بِسْمِ ٱللَّٰهِ ٱلرَّحْمَٰنِ ٱلرَّحِيمِ" >>>Software expert<<< 1. AutoCAD 2. Autodesk Revit 3. MS Office, Excel 4. PowerPoint 5. Primavera P6 6. Macquay Software (duct and pipe sizing) 7. HAP (HVAC Load Calculation) 8. Adobe Photoshop & Illustrator. 9. Solidworks >>>Services offered<<< 1. Architecture/House Plan/Elevation Editing, addition & modification. 2. Revit Conversion of 2D pdf/dwg file to 3D. 3. Estimation of MEP and landscape quantities, preparation of BOQ. 4. PowerPoint Presentation (2D, 3D animated Presentation, Business Presentation, Education Presentation, and Many more. 5. Preparation of tender drawing, shop drawing, and As-built drawings in AutoCAD. 6. Technical submittals preparation. 7. Plumbing system load calculation by calculation of fixture units. 8. Air devices selection, VCD, VAV, CAV, AHU, FCU, ESP calculation for ducts and pump head calculation. 9. Fire fighting system design as per NFPA 13, 13D,14, 2, 25. 10. Project Scheduling using Primavera P6. 11. Product Designing 12. Piping, electrical, mechanical 3D modeling 13. Any work related to Photoshop (editing, background removal, logo, Flyer, Brochure, Banner/Billboard etc) >>>Why hire us?<<< -15 years of experience. -Graduated Highly responsible and professional team. - Will provide highest quality work with lowest cost. >>>Work Terms<<< 24/7 available, communication is through freelancer.com. Project Message Board (PMB), work as per your satisfaction, unlimited revision without any additional cost. less
  • Hire Hayat87
  • Hire     yassinedamoh
Hire     yassinedamoh

    yassinedamoh yassinedamoh

    Morocco $35 USD / hour
    Power Electronics Hardware Engineer
    Morocco
    5.7
    15 reviews 15 reviews $35 USD per hour
    5+ Years as a Power Electronics Hardware Engineer • Design Analog/Digital/power electronics circuits according to customer specifications; • Perform Simulations (PSPICE, LTSPICE, MATLAB/SIMULINK, PSIM, TINA TI), including Monte-Carlo and Worst Case Simulations; • Perform Worst Case Analysis (WCA) ad Design...
    5+ Years as a Power Electronics Hardware Engineer • Design Analog/Digital/power electronics circuits according to customer specifications; • Perform Simulations (PSPICE, LTSPICE, MATLAB/SIMULINK, PSIM, TINA TI), including Monte-Carlo and Worst Case Simulations; • Perform Worst Case Analysis (WCA) ad Design calculation/Verification of each electronic circuit (MathCAD); • Perform Thermal Modeling (Foster) of power modules. • Provide Documentation to Engineering: Hardware Interface Technical Specifications (HITS); • Create and modify schematics and PCB (PCAD, Altium Designer, and KICAD) Some background on TaQatronics Engineering Services: We have started this company a little while back, doing product design and support for our clients on: - Hardware design, schematic, simulation worst case and Monte Carlo analysis/Simulation. - PCB design and layout, - Mechanical design - Software Development (which is mostly done externally at the time) We also supported couple of our client in the sourcing, prototyping and manufacturing phases. Using our contacts in order to get them better deal and reliable manufacturing solutions as well. And lately, we have also been doing cost optimization for some products to face the component shortage issues, making design with multiple alternatives based on client target prices, to avoid production shutdowns and cost spikes less
  • Hire yassinedamoh
  • Hire     sulimanbiomed
Hire     sulimanbiomed

    sulimanbiomed sulimanbiomed

    Malaysia $20 USD / hour
    Electrics and Electronics Engineer
    Malaysia
    2.8
    3 reviews 3 reviews $20 USD per hour
    I have experience in electrics and electronics for more than 8 years. My skills - ESP32, Arduino, Raspberry Pi, STM32, PIC - PCB using Altium, Kicad - Web & Mobile App for IoT - Electrics Drawing, Switch Board Design using AutoCAD My develop language - C/C++, Python, MicroPython, Assembler, VHDL - WEB--- BACKEND:...
    I have experience in electrics and electronics for more than 8 years. My skills - ESP32, Arduino, Raspberry Pi, STM32, PIC - PCB using Altium, Kicad - Web & Mobile App for IoT - Electrics Drawing, Switch Board Design using AutoCAD My develop language - C/C++, Python, MicroPython, Assembler, VHDL - WEB--- BACKEND: Express.js, Django/Flask, FRONTEND: React.js, Vue.js - MOBILE---Native: java/KOTLIN, SWIFT, Hybrid: Flutter, React Native less
  • Hire sulimanbiomed
  • Hire     Devpro11
Hire     Devpro11

    Devpro11 Devpro11

    Morocco $30 USD / hour
    Senior PCB & Firmware Developer
    Morocco
    5.6
    22 reviews 22 reviews $30 USD per hour
    Hello, Dear Clients! You will see the reality of the near future by us. I will share ideas and inspiration for your project and provide you with the best technical service to make it the reality you desire. Our team consists of senior freelancers(engineers/developers/designers) with more than 10+ years of development...
    Hello, Dear Clients! You will see the reality of the near future by us. I will share ideas and inspiration for your project and provide you with the best technical service to make it the reality you desire. Our team consists of senior freelancers(engineers/developers/designers) with more than 10+ years of development experience in various fields. Our skill services are as follows: ------------------- Engineering(Hardware) skills are-------------------- ✅ Mechanical/Structural engineering(CAD/CAM, Solidworks, AutoCad) ✅ 3D Modeling & 3D Designs & 3D Rendering. ✅ Schematic/PCB layout and Design & Simulation(can design 8-layers PCB) ✅ Reverse engineering ✅ Embedded Firmware Programming, Industrial Automation - STM32, Arduino, Raspberry Pi, Jetson. - PIC, Atmega, MSP430, etc. - nRF series, ESP32 series, etc. - PLC & SCADA, Eplan development. ✅ Design and simulation of Radio Frequency/Microwave/mm-wave systems and subsystems (by using Keysight ADS, CST, HFSS, FEKO, GENESYS...) RECTENNA, ANTENNA, Filter, Synthesis, etc. ✅ IoT, xbee/zigbee, BLE, LoRa/LoRaWAN/Sigfox/LTE, GPS/GNSS, UWB ✅ Thermal/EMC/EMI simulation and analysis ✅ AI/ML, Deep Learning, Open CV We always work honestly and satisfy clients. Feel free to contact me with any questions. Thanks! Ait. less
  • Hire Devpro11
  • Hire     darrel131191
Hire     darrel131191

    darrel131191 darrel131191

    Malaysia $50 USD / hour
    8 years of Machine Learning experience
    Malaysia
    5.2
    1 review 1 review $50 USD per hour
    My name is Darrel Low and I graduated in computer science from the University of Kolej Universiti SEGi. I major mainly in image processing and machine learning. I am a dedicated and hard-working person who believes in honesty and good working relation. Even though I am new at this kind of job, I have certain qualities...
    My name is Darrel Low and I graduated in computer science from the University of Kolej Universiti SEGi. I major mainly in image processing and machine learning. I am a dedicated and hard-working person who believes in honesty and good working relation. Even though I am new at this kind of job, I have certain qualities which make me good at this. Development Fields - Generic Application based on C#, C++/Qt, Python, Java - Image processing based on CV - Tensorflow based machine learning - Raspberry PI develop - ECommerce/Laravel/ReactJS etc. So, what are you waiting for I am available here 24/7. Let's begin the glorious journey of working with you. less
  • Hire darrel131191
  • Hire     iamhamzazaki
Hire     iamhamzazaki

    iamhamzazaki iamhamzazaki

    Pakistan $25 USD / hour
    Mechanical Design Engineer
    Pakistan
    5.8
    84 reviews 84 reviews $25 USD per hour
    Hey there Hi I’m Hamza Amjad, a Mechanical Engineer having experience in MATLAB and Cad Modelling/ Simulation I’m Providing Following Services : *Excel,Word *MATLAB SIMULINK *Cad Modeler (Solidworks, Autocad) *Ansys(FEA,CFD etc) I have 3 years experience in SOLIDWORKS ANSYS, FLUENT, STRUCTURAL ANALYSIS,...
    Hey there Hi I’m Hamza Amjad, a Mechanical Engineer having experience in MATLAB and Cad Modelling/ Simulation I’m Providing Following Services : *Excel,Word *MATLAB SIMULINK *Cad Modeler (Solidworks, Autocad) *Ansys(FEA,CFD etc) I have 3 years experience in SOLIDWORKS ANSYS, FLUENT, STRUCTURAL ANALYSIS, CFD,FEA VIBRATION ANALYSIS FAILURE OF BEAMS DEFROMATIONS STRESS AND STRAINS 3D MODELLING SLDPRT,IAM,STEP,DWG,DFX files. If you need any work related to my skills, just let me inform, I will do it. So, Feel free to contact me. We can discuss your project to make it better for you. Thank You! Regards, HAMZA AMJAD. Hoping for a positive interaction less
  • Hire iamhamzazaki

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""