Furniture drawings cad jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    12,654 furniture drawings cad jobs found, pricing in USD

    Please apply only if you have relevant furniture references Reference files (including the 3D model) are attached You will need to create 2,000 low poly 3D models of simple furniture Input: 3-6 images Output: GLTF (20K polygons or less), full PBR flow. Read more about our creation flow here: [Removed by Freelancer.com Admin - See Section 13 of

    $24 (Avg Bid)
    $24 Avg Bid
    6 bids

    I'm a homeowner with a background in construction and project management - recent...in construction and project management - recently completed an extension on our home and now want to get an extension drawn on the other side of the house. I have up to date CAD files and know exactly what i'm after - just need someone to modify the files as required.

    $150 (Avg Bid)
    $150 Avg Bid
    33 bids

    ...who could help to install the pod once on site in Nottingham. The only tool needed is a standard Allen key and we would provide all install instructions. The flat packed furniture and accessories would come in the form of: 3 removal bags filled with wooden panels: each 2m long, 40cm wide, 15cm deep. 1 loose wooden base ring: 150cm diameter 1 base

    $26 - $327
    Local
    $26 - $327
    0 bids
    Furniture Rendering CGI 6 days left
    VERIFIED

    I require CGI rendering for outdoor garden furniture.

    $165 (Avg Bid)
    $165 Avg Bid
    44 bids

    Need 2 Articles on Furniture removalists business for blogging. -800 words each. - Original - Copyscape passed - engaging.

    $36 (Avg Bid)
    $36 Avg Bid
    67 bids
    Build animated drawings 6 days left
    VERIFIED

    We are in need of multiple drawings that exactly replicate drawings of a golfer throughout the golf swing. There will be 30 drawings to complete for the back view of the golfer and 30 to complete for the front view. Each drawing has to be seamless from one drawing to another such that when shown at fast speed it looks like a moving golfer with no transitions

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    6 bids

    Husband wife (29) with four month old baby boy, two large dogs and two cats. We need more room for our growing family. Doing an addition on our house. Need the house drawn as well as the addition for bids and town approval. Attached is rough drawing of layout (existing/addition). Can give much more detail to you as far as dimensions and building make up.

    $303 (Avg Bid)
    $303 Avg Bid
    11 bids

    Please apply only if you have relevant furniture references Reference files (including the 3D model) are attached You will need to create 2,000 low poly 3D models of simple furniture Input: 3-6 images Output: GLTF (20K polygons or less), full PBR flow. Read more about our creation flow here: [Removed by Freelancer.com Admin - See Section 13 of

    $37 (Avg Bid)
    $37 Avg Bid
    7 bids
    Trophy icon Complete Furniture Design 5 days left

    Hi. I saw this furniture set online. I want to use it as the basis for making my own furniture. I will need the design for a desk, a bookshelf, & a bed. I adore the swirly design & want to incorporate it into all pieces. I describe what I want below but if you have a better idea or are inspired in a different direction feel free to submit those ideas

    $40 (Avg Bid)
    Guaranteed
    $40
    2 entries

    We need a design for a furniture and mattress company. We will be choosing the designer that has the most modern and non-templated design. If we can find your design on themeforest, we will not choose your design. Current website: [login to view URL]

    $60 (Avg Bid)
    $60
    3 entries
    building design drawings 5 days left
    VERIFIED

    I need some drawings made up for a planning application for a house. I have sketches but need drawings and ideally photorealistic images made.

    $332 (Avg Bid)
    $332 Avg Bid
    39 bids

    We are manufacturer designer of Telecommunication systems interested in designing a VoIP phone images of which can be found on the browser.

    $914 (Avg Bid)
    $914 Avg Bid
    8 bids

    I am opening a Small Furniture Company that intends to sell intelligent and different furniture and I need to create it's branding including logo, fonts, colors, applications and brand manual.

    $62 (Avg Bid)
    $62 Avg Bid
    30 bids

    Hi, I'm looking to collaborate with a freelancer/agency for a new project on one or several of the following items: - graphic design for several stationery & related products - illustrator for a family cooking recipes book - artist to draw/paint a series of images on a specific theme. Looking forward to working together.

    $432 (Avg Bid)
    $432 Avg Bid
    50 bids

    Building ...Its main product uses existing ship/airplane images and drawings, but I would like to be able to generate new, vector-based ship/airplane drawings whenever needed. The drawings need to include side, top, and front views, and I will be seeking an initial set of five new vector-based ship drawings. (See attached for details and an example)

    $357 (Avg Bid)
    $357 Avg Bid
    27 bids

    Please apply only if you have relevant furniture references Reference files (including the 3D model) are attached You will need to create 2,000 low poly 3D models of simple furniture Input: 3-6 images Output: GLTF (20K polygons or less), full PBR flow. Read more about our creation flow here: [login to view URL]

    $24 (Avg Bid)
    $24 Avg Bid
    10 bids

    I need some brand packaging assistance.

    $59 (Avg Bid)
    $59 Avg Bid
    52 bids

    Hi - I am looking for someone to create a 3 D model from Working Drawings

    $99 (Avg Bid)
    $99 Avg Bid
    92 bids

    I want my son (black) to be drawn to look like the Boss Baby cartoon (with woolly hair and brown skin tone). I want 4 different full body drawings as per attached pics. It's for his personalized Boss Baby themed birthday party artwork that will go onto banners, invitation cards, party gift bags, etc. png image with transparent background. I will send

    $72 (Avg Bid)
    $72 Avg Bid
    15 bids
    drawings for my kids 3 days left
    VERIFIED

    I need to draw a sketch for my kids - 2 drawings per 2 kids

    $28 (Avg Bid)
    $28 Avg Bid
    39 bids

    Hotel Furniture Suppliers List (America, Turkey, Vietnam, China etc) with Catalogs, Prices & Origin. For a four star hotel. We need semi Classic furniture.

    $152 (Avg Bid)
    $152 Avg Bid
    9 bids

    ...found to be satisfactory, a batch will be ordered. We would like to use FSC approved Merbau or similar wood and formaldehyde free plywood for the tables. We already have CAD drawings. I have attached photos of similar tables. Please note that the budget I have indicated applies to sourcing agents only. If you are a manufacturer and you are applying for

    $293 (Avg Bid)
    $293 Avg Bid
    16 bids

    Design and Provide fabrication drawings and parts list of snack and soda vending machines

    $285 (Avg Bid)
    $285 Avg Bid
    32 bids

    I need a 3D model of furniture placed in a room

    $127 (Avg Bid)
    $127 Avg Bid
    35 bids
    Civil Engineering Drawings 2 days left
    VERIFIED

    I need the following Civil Engineering drawings: (1) Notice of Intent ( NOI) to TCEQ required. (2) Location and detail of all storm water pipe (3) Hydraulic Drainage Study; (4) Retention Pond Design for Storm Water; (5) Plat with utility and drainage easements identified; (6) Details of drainage inlets; (7) Domestic water needs ( size of line), as well

    $162 (Avg Bid)
    $162 Avg Bid
    25 bids

    ...here [login to view URL] I am finding it difficult to source quality SVG line drawings to draw with my plotter, so Part 1 of the project is to help me with this. I need a reliable process to turn images into SVG line drawings that can be drawn on my plotter, either using existing software solutions or a custom piece of software

    $95 (Avg Bid)
    $95 Avg Bid
    4 bids

    The main goal of this project is: Make textures of the furniture models from laser scanning. For texturing you have to use attached photos. For wooden parts you can use any similar available textures. There will be need to improve models like close holes, little bit of sculpting. List of items in this part: - Table with 8 chairs - set of 2x sofa with

    $175 (Avg Bid)
    $175 Avg Bid
    39 bids

    ...Protection Design and Consulting company with over 20 years trade experience. We are looking for a certified engineer in Ontario, Canada, to review and stamp fire protection drawings and backflow prevention submittals. We are not looking to “purchase” a stamp. We operate with integrity and professionalism. The right candidate will be familiar with NFPA

    $256 (Avg Bid)
    $256 Avg Bid
    2 bids

    I have a list of architectural project sheets in a complete drawing set and a list of specification section from the project manual. The sheet names, date, spec sections and description, etc need to get populated into the word form. The entries in the form are just examples, and should be deleted, so the form is filled with only the sheets and specs from the pdfs. Drawing sheets should be listed ...

    $23 (Avg Bid)
    $23 Avg Bid
    19 bids

    Will need to be stamped and approved for permitting in county of San Bernardino California, will be RV storage for a 45foot RV, with an attached 800sqft living quarters. I prefer contemporary/industrial designs, so I've attached some of the looks I like, this home will be built in a high desert so I would like it to fit in geographically.

    $352 (Avg Bid)
    $352 Avg Bid
    8 bids

    Furniture design - re-styling an existing fixed seat

    $706 (Avg Bid)
    $706 Avg Bid
    25 bids
    2D and 3D Drawings 18 hours left

    Need someone experienced to work with the project. I want someone who can work with 2D Vectors on Android app and with 3D on web. That is 2D drawings which will be made in android studio related to floor plans and later on exported and displayed only on the web in 3D. For More Information contact.

    $397 (Avg Bid)
    $397 Avg Bid
    9 bids

    This is not rendering gig!!! We manufacture and supp...review the architectural plans, measure from elevations and match our company's products based on the shop drawings we provided. This is a part-time to full time job. We will be paying per set of drawings. AutoCad and architectural drawings navigational knowledge with 3 years experience must.

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    36 bids

    ...freelancer who would be in a position to prepare hand made (not computer made) 18 drawings (illustrations) for a book on personal finanse management aimed at males/females age 18-25. Each illustration should match each chapter title (there are 18 chapters hence 18 drawings are needed). We need files in ai, tiff or eps file format. Each illustration in

    $613 (Avg Bid)
    $613 Avg Bid
    103 bids

    Make 3 floorplans for porch (birdview, front and sideview) and the same drawings in autocad You must look at the attached file to read the project. Notice that the measurements are not finalized and you will need to change some of the measurements later. I will pay you USD 40.

    $96 (Avg Bid)
    $96 Avg Bid
    26 bids
    Edit two drawings 6 hours left

    I need two drawings "cleaned up" with an eraser tool and something added to one of the drawings. $10 fixed price.

    $12 (Avg Bid)
    $12 Avg Bid
    35 bids

    Would you be interested in creating shop drawings for us? This time we would need roof shop drawings for an SBS system. We have the DWG files and we just need to adjust them to our standards. Please let me know if you are interested. Then I'll send you the documents.

    $138 (Avg Bid)
    $138 Avg Bid
    73 bids

    We are seeking a copywriter with an experience writing product descriptions for ecommerce site. Specifically, we need a copywriter to revise/edit all product descriptions on our site. Our online store has over 1,200 skus. Proficiently in Microsoft Excel and Word preferred. I suggest you, if you don't live in North America, please don't apply.

    $115 (Avg Bid)
    $115 Avg Bid
    19 bids

    We are a UK based online e-commerce store supplying vintage home furniture. We are looking for a Facebook Ads expert that has proven to deliver results and able to provide valuable support to best optimise a conversion funnel. We are ideally looking for a professional company or a specialist that has a proven track record of results (not promise results)

    $210 (Avg Bid)
    $210 Avg Bid
    10 bids

    A client has selected some bespoke furniture which we need 1 plan (from above) and elevation (front and side) for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can re-scale them our end once the dims

    $156 (Avg Bid)
    $156 Avg Bid
    18 bids

    A client has selected some bespoke furniture which we need plans and elevations for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can rescale them our end once the dims have been confirmed. The proportions

    $164 (Avg Bid)
    $164 Avg Bid
    19 bids

    We are polish, small company, produsing upholstery. Our brand is ower 10 years on a market. Our prducts are high quolity, up to date design, cosy and ergonomic. Most of our collections are modular. We looking for designers who create some new products for us. Enclosed three pictures of our collections

    $367 (Avg Bid)
    $367 Avg Bid
    10 bids

    Would you be able to start drafting up some elevations of the outside front and rear elevations for me based on the photos.

    $23 (Avg Bid)
    $23 Avg Bid
    46 bids

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    45 bids

    I have 2D vector CAD drawings that need to be cleaned up and prepared for patent drawings. approximately 10 drawings plus 1 drawing made from a photo. only people with prior design patent drawings or design patent illustration knowledge.

    $140 (Avg Bid)
    $140 Avg Bid
    15 bids

    I am studying the 3 main Pyramids of Giza and hope to write a book about them. I firstly want 2D AutoCAD drawings that highlight key dimensions. I have these for the Khufu (Cheops) Pyramid on a XL Spreadsheet. I want to highlight the inherent geometrical patterns by using different colored lines but this involves a large area outside the structure also

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    62 bids

    I retail sofas. I need clients to easily see what a chairs looks like, two seater, three seater etc. Line drawing, birds eye view. Rough hand drawn sketch provided.

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    24 bids

    I am going to send you pictures with details of how I want the website to be like. I have five furniture houses in different countries and I want each of them to be on the website all existing independently with payment options and a blog

    $725 (Avg Bid)
    $725 Avg Bid
    27 bids

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets

    $316 (Avg Bid)
    $316 Avg Bid
    55 bids

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    $111 (Avg Bid)
    $111 Avg Bid
    11 bids