Gprs project language jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    3,006 gprs project language jobs found, pricing in USD
    PCB Design 5 days left

    ...low power consumption, be able to run some code (max memory approx 20,000 bytes). It will work with a Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution, most likely the 7000 series. The outcome for this project will be: One page of potential components with possible suppliers with pros / cons of each component PCB Design and revisions (This

    $389 (Avg Bid)
    $389 Avg Bid
    20 bids

    I want to publish my gps data to aws without wifi only using gprs module over mqtt

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    Looking for a Linux sysadmin who have experience with serial port settings, serial communication. I want to use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need

    $17 (Avg Bid)
    $17 Avg Bid
    7 bids

    I want to interface SIM800/SIM900 or Telit GL865 to LPC2148. There is one 125kHz RFID connected to LPC2148 also. I want to upload RFID Card ID to a webserver using GSM/GPRS module. I need a FreeRTOS application for this task, which can scan RFID and upload card ID simultaneously. Card wil be scanned very fast like 70-80 cards per minute.

    $303 (Avg Bid)
    $303 Avg Bid
    11 bids

    ...Installed device count b) Total Active list (a device count that is sending a report any time of the day) c) Total list Not active or Reporting (planned maintenance, accident, GPRS or other issues) Main Report List includes but not limited to: Vehicle Reports: a) Vehicle list b) Vehicle Activity Summary c) Vehicle Trip Summary d) Vehicle Exception Summary

    $510 (Avg Bid)
    $510 Avg Bid
    5 bids

    Looking for system administrator who have experience in linux with PURE SMS sending - receiving use USB GPRS modem. Need to properly attach GPRS modem uver USB port to ttyUSB0 and send SMS message with AT commands, also receive response from modem.

    $133 (Avg Bid)
    $133 Avg Bid
    10 bids

    Looking for a vehicle tracking software with harsh breaking and h...app, open source software will not be entertained, need full access to source code which is already custom built and ready to use. Tracking using device is a must, understand GPRS protocol data for web application. Proposals sent for development from scratch will not be entertained.

    $10100 (Avg Bid)
    $10100 Avg Bid
    45 bids

    We are looking for a web based real time vehicle tracking software system to be used with generic and popular GPS/GSM/GPRS based tracking devices. We intend to have a GPS tracking/fleet management software for our vehicles. If you already have done much of the software is very helpful with the times. Application Requirements: (PHP, MySQL Server)

    $3030 (Avg Bid)
    $3030 Avg Bid
    56 bids

    We have got own Restaurant Order software and we are using google cloud print. Now we are trying to switch to Azure IOT service. We have got GPRS printers and configured. It iis server connected state but we couldn't send any text to printer. The message comes to IOT Hub succesfully but not forwarding to the printer. Proje steps: 1.) With Microsoft

    $235 (Avg Bid)
    $235 Avg Bid
    8 bids

    ...(Registration of orders in order, location of users, geo referencing of clients) GPRS / EDGE / 3G / 4G / HSPA + communication Soft-MOS has an Integration API that allows you to connect to any system via WEB SERVICE. Our company provides all the integration documentation and an example project developed in PHP for programmers. Integration to the following systems:

    $523 (Avg Bid)
    $523 Avg Bid
    10 bids

    Hi, We are looking for Firmware developer for IOT product developer. Expertise with GSM/GPRS, WIFI, BLE/BT, GPS/GLNSS, HALL SENSORS, ACCELEROMETER/GRYOSCOPE and its use for GPS correction, Motion detection, Power management planning

    $1640 (Avg Bid)
    $1640 Avg Bid
    15 bids

    I need pcb and firmware design of a obd tracking device that has a wireless screen . The obd needs to have gps, gprs, bluetooth . Screen needs to have low power bluetooth to receive data and display .

    $2144 (Avg Bid)
    $2144 Avg Bid
    18 bids

    ...web page, PCB design The tracker send GPS-CELL-WIFI data via HTTP/Gprs connection to a server/web page And from web interface must have 2 button to turn ON and OFF a radiofrequency beacon in the tracker I only see offers from those who already have experience in the field of SIM / GPRS IOT modules and google maps, so send me some examples or work you

    $3042 (Avg Bid)
    $3042 Avg Bid
    53 bids

    Design & Development of wearable device with GPS&GPRS along with battery and charger with accelerometer and gyro. The end product should be very compact and thin

    $6775 (Avg Bid)
    $6775 Avg Bid
    11 bids

    Dear Ahmed, I have a restaurant website built with Wordpress using woocommrce. Now we can receive order via email. We are trying to use gprs/SMS/wifi pos printer. My main objective is to receive online order in a gprs pos printer in the kitchen. What ever information got from printer manual I feel like I won't be able to setup communication between my

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    1 bids

    we are looking for a programmer to collaborate whit us to envole a software able to analize cellular data in a local web..

    $641 (Avg Bid)
    $641 Avg Bid
    9 bids

    [login to view URL] phone scan the QR code on...state and other key information, the normal authority can unlock the lock; [login to view URL] issued an unlock command to the phone, while issuing an unlock command to the lock [login to view URL] - GPRS unlock or Bluetooth connection to unlock; [login to view URL] positioning, reporting real-time timing information we also need the programm...

    $259 (Avg Bid)
    $259 Avg Bid
    6 bids

    Requirements: - Android app - App is online realtime via GPRS - DB MySQL - Report: send e-mail with attached PDF document - Create in MS Visual Studio (important) - Create GUI design of this app - in future do some add‘s (new project) - app has 5 page (see documentation) - I need all source code of this app.

    $195 (Avg Bid)
    $195 Avg Bid
    23 bids

    ...able to attach easily to all the interface attachments of the controlling Mother boards. All parameters of the modem and its programming should be done distance, by using the GPRS connected FOTA. In addition, for the comfort when using the device, the modem needs to be able to receive SMS-commands (example: to check the level of the signal; change in

    $5933 (Avg Bid)
    Featured
    $5933 Avg Bid
    21 bids

    Hello, I need an Arduino sketch to connect an Arduino Nano to the AWS IoT plataform using MQTT protocol and the SIM800 GPRS board. I need one button and others 3 integers variables to be readed and setted from arduino.

    $62 (Avg Bid)
    $62 Avg Bid
    16 bids

    ... localization and IoT devices. We use specially tailored technological and manufacturing processes that guarantee the uniqueness and quality of our products. The Project: We have a GPRS Hardware Development Kit for testing purposes - M66 Quectel module or electronics based on MTK6261available. In the Proof of Concept we want to confirm that we could

    $679 (Avg Bid)
    $679 Avg Bid
    9 bids

    My project is to use an arduino circuit like ATMEGA328P Pro Mini 328 Mini and a SIM 800L gprs GSM circuit board, prefered board to be smallest possible or ( if you can recommend better module for this project is fine let me know) conected to a the main alarm control panel and whenever there is an alarm this module call and send a text massage to the

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    2 bids

    ...neighboring cell towers (assuming GSM). The location calculation will be done on the server and not on the client mobile phone. the phone's single job is to send via HTTP/GPRS, the GSM tower it's currently connected to, plus other neighboring cell towers it currently 'sees'.a pls develop a software similar to PINGZ by tarrifman as described in the

    $146 (Avg Bid)
    $146 Avg Bid
    4 bids

    I need help installing gps (Neo06MV2), gprs(Sim800L) and inertial(MPU9250) modules. I followed several tutorials through the internet but I did not succeed. I was able to just make the mpu9250 work, gps and gprs did not work. I need guidance on how to install these modules. I need to do it for myself, I need to be guided so that I can do and learn myself

    $79 (Avg Bid)
    $79 Avg Bid
    11 bids

    I need two pcb's designed, they need to interact via bluetooth BLE. Unit #1 needs the following capabilities and sensors. GSM / GPRS BLE Compass Gyroscope Accelorometer OBD interaction Unit #2 needs BLE To interface with e-ink screen Unit #1 will need a backup battery, but will have constant power in vehicle. Unit #2 has to operate with as little

    $750 - $1500
    Sealed NDA
    $750 - $1500
    17 bids

    .... • Flexibility should be there with internet connection, we should offer client either GPRS Integration or WiFi integration. • First year, my target would be 150 Station. • My Assumption to this either o Just flow Meter and Electricity meter connected to GPRS modem transferring the data to internet. o Ore we add an GT 540 RTU with Indusoft . who got

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    1 bids

    Please do reply if you can do this work perfectly . I need someone to hack a mobile phone and need all calldetails,callrecordings,videos,pics,messages,watssapp chats ,gprs location etc.,

    $69 (Avg Bid)
    $69 Avg Bid
    5 bids

    I need an experienced server developer to integrate remote thermal printer. My order taking software will send order to the web server and the thermal printer wi...My order taking software will send order to the web server and the thermal printer will print the order from server. The printer is GoodCom brand and will communicate using GPRS technology.

    $247 (Avg Bid)
    $247 Avg Bid
    12 bids

    Need to update firmware over the air for STM32F030C8 controller using GPRS . GPRS module used quectel MC60

    $358 (Avg Bid)
    $358 Avg Bid
    5 bids

    We require a freelancer which can assist with collection and retrieval of company owned GPRS devices. The task will include visiting confirmed locations of devices and retrieving them back to our Grey Lynn office in NZ.

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    1 bids

    ...restaurants in one place. With this food portal can able to connect hundreds of restaurants on one site. Using latest technology similar to JustConnect technology this is using SMS/GPRS Printers for two way communications from web portal to each individual restaurants, as The SMS printers can receive and send information simultaneously, so when the takeaway

    $3570 (Avg Bid)
    $3570 Avg Bid
    23 bids

    ...location, to be able to lock in on targets nd get them. . I need it to intercept and decipher radio traffic and record from both BTS and phones. A5.1 deciphering required for the GPRS Internet traffic in 3g or 2g. Need a customized front end GUI for user to easily enter [url removed, login to view] to display phone number phone model and country of origin

    $4110 (Avg Bid)
    $4110 Avg Bid
    8 bids

    I need an experienced server developer to integrate remote thermal printer. My order taking software will send order to the web server and the thermal printer wi...My order taking software will send order to the web server and the thermal printer will print the order from server. The printer is GoodCom brand and will communicate using GPRS technology.

    $302 (Avg Bid)
    $302 Avg Bid
    8 bids

    I need Python programmer to access features in raspberry like gps, gprs, camera, gyroscope, sqlite ... and develop some routines for creating the software. I explain better by the chat to anyone who has interest in the project.

    $365 (Avg Bid)
    $365 Avg Bid
    28 bids

    ...developing autonomous operation and maintenance (O & M) solutions for power plants. Here we want to develop a web interface to communicate with remotely installed robotic system by GPRS (HTTP communication protocol). This interface will have two kind of logins (Admin and Clients) with different accessibility rights. There will be one admin and multiple clients

    $867 (Avg Bid)
    $867 Avg Bid
    5 bids

    We are an early start-up. The project we are developing requires that a client could read a text (explanations, instructions) while simultaneously watching the real-life action. We need to contract an engineering/IT specialist to identify possible approaches to the development of hardware and software for the required device(s). As it seems, there

    $486 (Avg Bid)
    $486 Avg Bid
    10 bids

    I want to build an online store to sell electronic items like Raspberry pi, Arduino, gprs boards, etc and components.

    $2213 (Avg Bid)
    $2213 Avg Bid
    44 bids

    I am searching a develloper to write the code for an arduino conected to a GPRS module. The system has to read SDI-12 sensor protocol and send it to a server each 15 minutes.

    $161 (Avg Bid)
    $161 Avg Bid
    29 bids

    Development of dispensing machine Dispenses products after validating user identification, with ethernet conecxion and gprs. It must measure temperature and relative humidity. Transactions are recorded and recorded in remote database ARM microcontroller GSM Ethernet Altium IoT Micro SD LCD Battery

    $736 (Avg Bid)
    $736 Avg Bid
    14 bids

    ...map coordinates mobile symbian os, open source web tracking gps, tracking gps mobile sms imei, tracking gps design, tracking gps gprs server software, vbnet source code hospital management system, hardware tracking gps gprs, free source code hospital management system, tracking gps mobile phone realtime google maps, asp source code hospital management

    $1907 (Avg Bid)
    $1907 Avg Bid
    30 bids

    I am using GMS 32 PORT BAILING MODEM for this internet connection, I opened the GPRS connection and received data from the site, however I do not know how to connect 3G, i want to open 3G connection, send and receive data. I need code c#

    $504 (Avg Bid)
    $504 Avg Bid
    6 bids

    I need a new website. I need you to design and build it. My name is Maurice from Nairobi in kenya.I deal wi...website. I need you to design and build it. My name is Maurice from Nairobi in kenya.I deal with vehicle speed governors and GPS tracking services. I need a website with gprs capabilities to host these trackers and to market my services.

    $523 (Avg Bid)
    $523 Avg Bid
    45 bids

    Hi there, I would like you to write arduino code. Basically i want to read reading of depth of water in a open channel. please see the attached pdf for further explanation. Your written code should be able to run on a virtual environment also So i can check it. for more information send me a PM.

    $139 (Avg Bid)
    Featured
    $139 Avg Bid
    8 bids

    I require a smart watch like karacus with BLE, high sound,GSM,GPRS module,5cmX3cm display, running android and having the features of smartwatch. High battery life, simcard

    $12435 (Avg Bid)
    $12435 Avg Bid
    5 bids

    Build an Saleforce App which outputs data as email. Then Integrated with a GPRS or WIFI printer such as Goodcom GT5000S GPRS SMS WIFI Printer to retrieve data as POP3/Customize the printer firmware. The salesforce App will connect to a database with multiple restaurants/takeaways profiles and also allow admin to upload Menu items, which then can be

    $1196 (Avg Bid)
    $1196 Avg Bid
    35 bids

    ...connecting a GSM/GPRS modem board to a Sonoff RF Bridge 433Mhz ([login to view URL]). The GSM/GPRS modem will be used to connect to the internet and send MQTT messages. It would be helpful if you have other/better suggestions how I can run Espurina firmware ([login to view URL]) using GSM/GPRS for the internet

    $98 (Avg Bid)
    $98 Avg Bid
    12 bids

    i need a web appilaction (java sever faces) to be precise that can send and recieve SMS via a GPRS modem and also a database to save sent and recieved from the application SMS database should be created with MIcrosoft SQL server.

    $221 (Avg Bid)
    $221 Avg Bid
    14 bids

    We currently have an android and IOS app for our GP...within the app (basic admin type change) 2) an overall map view to show all of the tracking devices on the phones screen 3) the app to communicate with our software to send GPRS commands 4) and lastly the option to send alerts / messages to the phone (not via SMS but via a notification message)

    $826 (Avg Bid)
    $826 Avg Bid
    131 bids