# Matlab project control jobs

**Control** systems that requires **Matlab**

In this **project**, you will work with the data files provided in the "Names" folder in the files section of this class. These files contain national data on the relative frequency of given names in the population of U.S. births where the individual has a Social Security Number. For each year of birth YYYY after 1879, there is a comma-delimited file called

I need help in my **project** about Transformation of system models in **Matlab**; ; Some useful results in vector-matrix analysis; Controllability; Observability; Pole placement; solving pole-placement using **Matlab**; state observers; design of **control** systems with observers; quadratic optimal regulator systems. If you think this is your field please contact

Hello Everyone
I need someone who is expert in **MATLAB** and can provide quality work. **project** is related to **control** system. i have each and every detail with me so please more details in the chat.
thank you

I would like to design a PD or PID **control** system using **matlab** in order to **control** the flight of a quadrotor.
For more information please check the attached documents for **project** requirements and the sample **Matlab** code.

robotic arm pick and place in **matlab**. also i should be able to **control** angles using slider.
**control** using PID
I need to make this **project** with writeup of 10000 words

robotic arm pick and place in **matlab**. also i should be able to **control** angles using slider.
I need to make this **project** with writeup of 10000 words

This **project** requires **control** system and **Matlab** background and the detail description is attached below.

...every 0.5 ms). The task should be implemented in **Matlab** simulink. However, I already did the **project** to the some point, I successfully set up the blocks and I got a certain results. Yet, it's needed to develop a transfer functions for each of the used blocks (XOR circuit, Filter, VCO - voltage **control** oscillator) in order to achieve the best results

...is used as a compensation device with a specific **control** strategy based on a PI controller to solve this problem(improve the voltage profile)(11KV/50Hz)
So the main objectives of this research work are:
1- model this radial distribution system by **Matlab** model either by **Matlab** Simulink or by **Matlab** code according to the information given about the

Hello
I need someone who can do model predictive **control** with Kalman filter and I have to do this to **control** the speed of induction motor.
I need the simulink model, the entire system . the kalman filter is used to estimate mainly the rotor flux,I need to use the MPC to **control** thee velocity , the kalman filter is a secondary thing
Kindly, check the

...AC. In this **project**, aim is to develop a **control** and power circuit that is capable of Converting DC to AC. A multivibrator can be used to create triggering pulses for a Power MOSFET such as IRF540 to Create a low power circuit. The **project** scope includes a study of inverters, design, and simulation using software’s such as pspice, **Matlab**, Tina etc and

Hello
I need someone who can do model predictive **control** with Kalman filter and I have to do this to **control** the speed of induction motor.
I need the simulink model, the entire system . the kalman filter is used to estimate mainly the rotor flux,I need to use the MPC to **control** thee velocity , the kalman filter is a secondary thing
Kindly, check the

There are some tasks in this **Project**:
1. Design of electronic system based on Arduino (consisting of temperature DS18B20 sensor and Solid State Relay ). System should be able to communicate with PC to exchange measurement data and to set controller parameters.
2. Analysis of step response of the system for different heating tank capacity

Hello, my name is Pamela, and I am a student in Costa Rica. I am involved in a group of social services that helps people with limited mobility.
The **project** that we want to develop is a low cost electric wheelchair, that steers similarly to a tank only by the use of traction on the opposite side of the desired direction. Instead of only driving two

I need to build using **matlab**/simulink an adaptive P&O to track maximum power point MPPT in photovoltaic stations. The adaptive or modified P&O will be compared using 3 different sets of controllers:
1- P&O using PID,
2- P&O using Model predictive **control** (MPC)
3- P&O using fuzzy logic (5 asymmetrical membership functions; the inputs will be the change

It is my task to design and simulate a Distributed **Control** System (DSC) for a microgrid (Hybrid), which is composed of PV, Wind, Battery, CHP and fuel cell. Someone else has helped me to complete the part of the design and simulation in **MATLAB** and I am having the proper results now. But, since he has left me, I need someone to go through the whole work

1. The **project** is asked to solve four ordinary differential equation showing the steps
2. find the transfer functions to be able to do the simulink and **Matlab**
3. apply the simulink and **Matlab**
4. JUST SHOW THE STEPS OF SOLVING THE ODEs + INSERT SIMULINK & **MATLAB** FILES
(Chemical Engineering - Process Dynamics and **Control**)

Use **MATLAB** to model engineering systems and design, implement, and test controllers
to modify their closed-loop behaviour. Use of **MATLAB** and/or Simulink to complete a series of **control**-based problems. Detailed **project** brief would be provided when the discussion starts.

A...new PWM **control** has to be developed for Matrix Converter for Non Linear [login to view URL] new **control** must show better simulation results compared with Modified Venturini Method. Work has to be simulated on **Matlab**/Simulink. I request only Power Electronics Specialization experts with already experience of Matrix Converter projects to take up the **project**.

the **project** include **matlab**, **control** system , differential techniques, and dynamics.

Complete a small **project** of Sliding Mode **Control** and **Matlab** code.

Hello
The **project** i have posted is related to process **control**.
It should be simulated in **matlab** using fomcon toolbox which is available to download from internet.
I need the plots for the transfer function(any real time) to which fopid is applied.
The abstract and all the necessary things are uploaded in pdf.

i already done **matlab** simulation..now i am doing hardware. just i need controlling part in my [login to view URL] an idea how to implement the **control** circuit in my **project**.

There are a few issues in the existing Simulink **project** which needs some more experience to fix so that it will be fully working. We are looking for some one with skills in **Matlab** Simulink particularly in power electronics, motor **control** and TI C2000 microprocessors.

I need someone professional in **matlab** to **control** the **project** that I attached with all parts I am using. NEED it to work.

Hello guys!
This is an $10 usd **project** for answering me some questions. The deliverable is text. Maybe I will hire the freelancer who helps me later to implement some **matlab** code.
I planning to create a skin mole/nevus detection algorithm for skin diseases. I have 3 datasets for face,skin tone and nevus detection so i need to feed the algorithms

Hello Freelancers!
I will need someone to help me solve a mathematical problem on Multivariate **Control** Systems, and then check the results with the help of **Matlab** so as to draw some conclusions uppon similarities and differences. The decsiption of the **project** is at the ATTACHED PDF!!
Thank you for your time, and I am looking forward to work with

Hi - as part of my **project** I need to simulate quadcopter flight in Simulink/**matlab**. the experiment is only to show how I can **control** the altitude using throttle compensation for different angles of attack. So I would need to show different angles and the change in altitude with no compensation. Then be able to do the same thing again but apply throttle

The Purpose of this **project** to make:
1-Dynamics model of a Autonomous steering **control** system of a 4 wheeled vehicle (using mathematical equations)
2-Designing a **control** model for this system using PID **control** system while being guided using Yellow line ( Using **matlab**).
3-Make a simulation on **MATLAB** SIMULINK .

It is a **project** on Process **Control** Using **Matlab**. A process consisting of 2 liquid storage tanks. Will provide more info later.

1.3 Objective
The objective of this **project** is to **control** and maintain the level of liquid by using two different controllers, which are PID and LQR controller in a two-tank system. This is because both of the LQR and PID controllers have different way of controlling the system. The other objective is to compare the performance of these controllers

...have a problem in one of my **matlab** code for Speed **control** of a DC motor using fuzzy logic Controller.
Speed **control** of a DC motor using fuzzy logic Controller
**MATLAB** code ([login to view URL]) using Runge-Kutta 4th method for (Speed **control** of a DC motor using fuzzy logic Controller)
You have to write a code for the whole **project**, Simulink is alrea...

Read **project** description carefully before you bid!! Attached is a picture of **Matlab** plot editor. I would like to be able to add to current line styles and **control** the spacing between dashes and the size of the dashes. I would like to have the following line style added to current **Matlab** standard ones
These added line styles should work as those predefined

...Autonomous vehicle **project**,
The main Task of this **project** is to make a steering **control** of a vehicle,
but this vehicle will trail another vehicle ( Tractor Trailer vehicles),
-1 vehicle has a motor ( Leading) the other vehicle is passive meaning its only trailling the first vehicle through a mechanical linkage.
The purpose of this **project** is to;
1-Develop

The conditions of this **project**;
1-This vehicle ( Tractor trailer vehicle ) will follow a predefined path which is marked using a yellow line.
2-There will be Cameras on the bottom of the vehicle in order to track the yellow line exactly 2 cameras.
3-The Yellow line width will be wider than the car itself
4-The simulation will be done using CAN communication

It is a **Control** System Modelling **Project** using **Matlab**. I need a report. Will provide the details later.

...my name is Fatima and I'm a student in biomedical engineering.
I have a **project** that I have been working on for a while now and could use some help in.
The **project** is done on **MATLAB** with help from simulink.
The main objective is to design a closed loop cardiovascular **control** system with changes in respiratory frequency as input and changes in Systolic

**MATLAB** code ([login to view URL]) using Runge-Kutta 4th method for (Speed **control** of a DC motor using fuzzy logic Controller)
I will be paying $30 for it so please don't offer me more than it, will not write back to the person who offers more than $30
**Project** will deadline is 5 days

**Control** remote objects using an EEG sensor.
For the price I am looking to pay I expect help throughout the **project** both software and hardware. Contact me for more information but I need all relevant skills mentioned.
Software and hardware to be used;
Neurosky mindwave mobile
Arduino
**Matlab**
Etc..

...working out “**Control** Systems” analysis using **MATLAB**.
I need the candidate to work out on 20 analysis tasks using **MATLAB**.
And if this first **project** goes well, there will be more further works in future.
Here, I’m listing one analysis, and I’m attached a detailed description about the analysis.
A floppy drive is a position **control**...

I had designed a multilevel inverter block diagram by using **Matlab**.
Currently, I needs help on adding a PID and also an AI **control** towards the multilevel inverter block diagram, the staircase output waveform from three of the circuits is then compared to finish my **project**.
The multilevel inverter layout that need to use to add those controls is uploaded

Oscillation **Control** of Overhead Crane Rig
parame The aims of the **project** mainly to investigate the dynamic model of an overhead crane structure due to moving mass, deflection, bending moment and to investigate the performance of the **control** technique in term of oscillation reduction and robustness. In this research the characteristic of pendulum is

parame The aims of the **project** mainly to investigate the dynamic model of an overhead crane structure due to moving mass, deflection, bending moment and to investigate the performance of the **control** technique in term of oscillation reduction and robustness. In this research the characteristic of pendulum is used as the model to derive dynamic equation

parame The aims of the **project** mainly to investigate the dynamic model of an overhead crane structure due to moving mass, deflection, bending moment and to investigate the performance of the **control** technique in term of oscillation reduction and robustness. In this research the characteristic of pendulum is used as the model to derive dynamic equation

i have ready **project** in **matlab**
Single-Phase Shunt Active Power Filter
REQUIREMENTS
1)THD(Total Harmonic Distortion) must be less than 5 =>compulsory
2)For inverter circuit use 4 IGBT
3)Use HCC (Hystersis current **control** meyhod) => not compulsory
4)Calculations required for values put in simulation
Source Line => Inductor value
Inverter=>

...Photovoltaic System is a huge topic that can be researched and studied on such as the arrangement of PV array is one of the issues that can be studied. Besides that, the **control** techniques can as well be delved into. Another important area that makes concern to the PV world would be the maximum power point tracker (MPPT) for PV to maximize the sun

...example cruise, Vertical take off landing and **control**, Roll, pitch and yaw motion. It should cruise at least at about 100 m altitude. Xplane, **Matlab** combination or any simulator combination with Python language is encouraged and will earn you bonus. More bonus can be earned if documentation like a **project** thesis is also done. The drone is not big size

I have a mathematical model, but I dont know how to **control** my process plant using fuzzy logic controller in simulink **matlab**. for any detail on this **project**, we can discussed further..

**Project** is smart traffic **control** system using image processing.
in which GUI in **MATLAB** is designed bt not according to requiremnt...so need a person who can modify it