Microcontroller jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    4,078 microcontroller jobs found, pricing in USD

    We need to make the software with a PIC 16f1933 micro controller for a 3 phase power and energy meter with the IC : ADE7758. The AD7758 should measure the power, energy, voltage, current and temperature variables and send to PIC micro controller via SPI, after this , the PIC micro controller should send the information with a proprietary protocol trough ESP8266 to internet fix IP. I have the hard...

    $433 (Avg Bid)
    $433 Avg Bid
    6 bids

    I need basic firmware to be designed for my microcontroller ESP32 with Arduino IDE... Functionalities needed: 1. Remote Application Update 2. IOT Integration with Alexa/AWS and Google Home 3. ESP32 to ESP32 communication master slave for multiple room controllers 4. Single Master ESP32 will communicate to internet and all slave will communicate to master

    $429 (Avg Bid)
    $429 Avg Bid
    9 bids

    Multi threading program required for microcontroller c1294 device for integration with existing program.

    $45 (Avg Bid)
    $45 Avg Bid
    4 bids

    The main goal of unobtrusive sensing is to enable continuous monitoring of the human body's physical activities and behaviours as well as during the subject's daily activities. The measured vital signs include body temperature, ECG and oxygen saturation (SpO2). I'm using a TMP36 for the temperature sensor and I've done the code in Python, which is to be used on a Raspberry Pi ...

    $160 (Avg Bid)
    $160 Avg Bid
    5 bids

    an arduino stepper motor control to drive the hands replacing the ordinary one

    $121 (Avg Bid)
    $121 Avg Bid
    16 bids
    PIC & ESP Programmer 5 days left
    VERIFIED

    I'm Bhuvana,...Solutions Pvt. Ltd. For a project now, the PCBs are ready. We need someone to program our requirements. The project is to transmit data from sensors through PIC18F46K22 Microcontroller and MikroE 2542 WiFi ESP Click to a PC, over wifi. This is a very urgent requirement. So, we need someone who is very confident and is based in Chennai.

    $149 (Avg Bid)
    $149 Avg Bid
    4 bids

    ...Microchip MPLAB Harmony platform. 2. TFT CONTROLLER HARDWARE TFT controller is an embedded hardware design based on PIC32 microcontroller. This are the main elements to be controlled by firmware: • PIC32MX460F512L microcontroller • S25FL064L 64Mbit SPI Flash memory • 2,8” color TFT 240x320 dots with backlight (controller included) • 5 push buttons to

    $9137 (Avg Bid)
    $9137 Avg Bid
    29 bids

    Simultaneous playing of MP3 and reading coordinates file from SD (VS1053). MP3 playing issue due to huge quantity of coordinates reading. Working via TeamViewer, due to specific microcontroller (Arduino compatible 3 cores processor). More details will be provided by chat.

    $114 (Avg Bid)
    $114 Avg Bid
    2 bids

    design a microcontroller based blood pressure system with gui

    $64 (Avg Bid)
    $64 Avg Bid
    4 bids

    ...be valued the most. Skills and Expertise: - Hands-on experience in IoT, Embedded Firmware / hardware Development. - Taking products from PoCs to Industrialization. - Microcontroller based hardware design and development along with embedded programming. - Good understanding of Multi Layer PCB Design and full hardware product life cycle In-depth knowledge

    $1232 (Avg Bid)
    $1232 Avg Bid
    12 bids

    ...and street-smartness a.k.a sense of“jugaad” will be valued the most. Skills and Expertise: - Hands-on experience in IoT, Embedded Firmware / hardware Development. - Microcontroller based hardware design and development along with embedded programming. - Good understanding of Multi Layer PCB Design and full hardware product life cycle In-depth knowledge

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    14 bids

    Need the C code of the driver of I2C for Atmel microcontroller. I have uploaded a application note of atmel/microchip you just need to implement it in keiluvision.

    $59 (Avg Bid)
    $59 Avg Bid
    10 bids

    my requirements as shown below [login to view URL] workstation software 3. Application of a ready-made microcontroller written in Python or java 4. The high-capacity computer must operate 4 operating systems together with the Windows host system. 5. Operating system operated by the controller. 6. Operating system on which the SDN system operates 7. Mininet

    $455 (Avg Bid)
    $455 Avg Bid
    4 bids

    my requirements as shown below [login to view URL] workstation software 3. Application of a ready-made microcontroller written in Python or java 4. The high-capacity computer must operate 4 operating systems together with the Windows host system. 5. Operating system operated by the controller. 6. Operating system on which the SDN system operates 7. Mininet

    $215 (Avg Bid)
    $215 Avg Bid
    5 bids

    ...choosen component, if it is good for this application [login to view URL] [login to view URL]:g:vYEAAOSwuQhcTY0D&frcectupt=true [login to view URL]

    $174 (Avg Bid)
    $174 Avg Bid
    14 bids

    [login to view URL] This project has complete code and hardware solutions,...has complete code and hardware solutions, I want to do it in a much simpler way, using cheaper hardware, such as arduino cc1101 433Mhz RF,I need a Arduino, Electronics, Microcontroller expert for my current project. If you have knowledge please bid.

    $293 (Avg Bid)
    $293 Avg Bid
    13 bids

    the project : The aim of the project is for you to create a small, hand-held, battery-powered IoT device. This will entail interfacing a microcontroller with a sensor and a display and any LEDs, buttons, buzzers etc. as required. You will have a choice of sensor which to use. After that the specific application of the project together with the features

    $131 (Avg Bid)
    $131 Avg Bid
    5 bids

    I have an embedded AtMega328 based project with a ready schematic, that needs to be...AtMega328 based project with a ready schematic, that needs to be converted to a well-designed PCB layout. Work to be done includes placing and routing the main components (microcontroller, BLE module , RFID module) as well as the design of a 13.56MHz antenna for NFC.

    $350 (Avg Bid)
    $350 Avg Bid
    39 bids

    he design and implementation of an automated liquid observation and controlling method utilizing an affordable liquid flow sensor and the microcontroller are presented here which has the ability to assist the health care provider to control the saline circulation rate using Matrix keypad or Android phone. The Arduino Mega (2560) platform has been used

    $151 (Avg Bid)
    $151 Avg Bid
    6 bids

    ...com/sites/default/files/NEO-LEA-M8T-FW3_DataSheet_%28UBX-15025193%[login to view URL] on this board: [login to view URL] I need to add a bluetooth module with microcontroller and configure/program it (I am open to suggestions but the ESP32 seems suitable, for example this one: [login to view URL]

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    18 bids

    INPUT: ______ multiple cctalk coinhoppers, cctalk coinreader & ccnet banknote acceptor YOUR JOB: _________ Create professional software on microcontroller to create a flexible money change machine using the 3 different devices with LCD screen for the enduser. Flexible with configuration file and LCD screen. (also used to program the system) Create

    $1024 (Avg Bid)
    $1024 Avg Bid
    12 bids

    Hi. I am trying to build a PCB. It will have the following sensors. Fingerprint sensor: Gas sensor : Micro-controller: Charging controller : It will also have 2 leds ( Green and Amber) for indicating power on and charging. The circuit will also have a master power switch for powering the circuit and a fire switch. The circuit will be powered by a 18650 LiPo battery. The micro-controller ...

    $192 (Avg Bid)
    $192 Avg Bid
    18 bids

    ...sensor ([login to view URL] ) should be realized. For this purpose, the Basys 3 FPGA board should be used. Furthermore, an 8051 microcontroller IP core([login to view URL]) is to be used, which takes over the control. The result of the brightness should be displayed on 7-segment

    $223 (Avg Bid)
    $223 Avg Bid
    6 bids

    I have an ATmega microntroller (same as uno) reading a voltage divider connected to a 9v battery. I want to send that data to another ATmega microcontroller using esp8266-01 and have it displayed to a 16x2 lcd. I have designed circuit schematics already

    $136 (Avg Bid)
    $136 Avg Bid
    42 bids

    Project Overview: We are working on a HS Microphone driver for the STM32F7 microcontroller. We have a base project that functions periodically that needs to be debugged so that the microphone works 100% of the time. More Details: For a little background, The original project was ported from the STM32Cube Expansion MEMs MIC 1 project and I have modified

    $233 (Avg Bid)
    $233 Avg Bid
    8 bids

    Looking for an electronics engineer having good experience with STM32F7 microcontroller. I will provide the details of work in chat

    $232 (Avg Bid)
    $232 Avg Bid
    14 bids

    I am trying to set ATTiny214 into power down sleep mode and wake it up using PIT (Periodic Interrupt Timer). I want the program to turn on a LED and then the Microcontroller sleeps for 8hrs, then wakes up and turns Off the LED Afro 16hrs.

    $134 (Avg Bid)
    $134 Avg Bid
    4 bids

    ...distance sensor ( [login to view URL] ) should be realized. For this purpose, the Basys 3 FPGA board should be used. Furthermore, an 8051 microcontroller IP core ([login to view URL]) is to be used, which takes over the control. The result of the distance measurement should be displayed

    $272 (Avg Bid)
    $272 Avg Bid
    2 bids

    ...embedded C programming in automotive domain Experience in AUTOSAR based software development. Good knowledge on Software Debugging & Testing methodology Good knowledge on microcontroller architecture, memory layouts, device drivers, compiler & debuggers Knowledge of diagnostic/communication stack/MCAL/NVRAM/Bootloader etc Hands on experience with CAN, I2C

    $2270 (Avg Bid)
    $2270 Avg Bid
    2 bids

    Need a tutor for basic project; using LabVIEW to communicate microcontroller in PCB (Printing Circuit Board).

    $2096 (Avg Bid)
    $2096 Avg Bid
    26 bids

    The scope of the project is to develop firmware for a PIC microcontroller based pcb. There are 11 opto couplers on the board. The optocouplers takes signals from the 7 segment LCD that I am running using an arduino and 7 segment display. The cables are looped from the 7 segment LCD and are connected to the pitch screws on the card. When the opto

    $152 (Avg Bid)
    $152 Avg Bid
    5 bids

    ...the ATMEL ATSAME70J19 and the AT90CAN32 microcontroller, which will allow for reprogramming the boards via the CAN bus. The CAN bus will have multiple of these microcontrollers, so they will need to be addressable. There are three parts of this project: 1. Write a bootloader for the ATSAME70J19 microcontroller, which will allow for upgrading firmware

    $4301 (Avg Bid)
    $4301 Avg Bid
    16 bids

    ...the ATMEL ATSAME70J19 and the AT90CAN32 microcontroller, which will allow for reprogramming the boards via the CAN bus. The CAN bus will have multiple of these microcontrollers, so they will need to be addressable. There are three parts of this project: 1. Write a bootloader for the ATSAME70J19 microcontroller, which will allow for upgrading firmware

    $1321 (Avg Bid)
    $1321 Avg Bid
    24 bids

    ...consisted of a microcontroller interfaced with mssd on a 40x40 mm^2 single layer pcb designed by me using altium designer. The objective was to display the digital values corresponding to an analog input fed to the controller through a voltage follower. 2. Thermal Printer :-- The project consisted of a microcontroller interfced

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    1 bids

    ...consisted of a microcontroller interfaced with mssd on a 40x40 mm^2 single layer pcb designed by me using altium designer. The objective was to display the digital values corresponding to an analog input fed to the controller through a voltage follower. 2. Thermal Printer :-- The project consisted of a microcontroller interfced

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    1 bids

    Hi ...We can discuss any details over chat. am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be freezed after our final Estimation

    $493 (Avg Bid)
    $493 Avg Bid
    1 bids

    Hi H...can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be freezed after our final Estimation

    $493 (Avg Bid)
    $493 Avg Bid
    1 bids

    Hi ...We can discuss any details over chat. am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be freezed after our final Estimation

    $493 (Avg Bid)
    $493 Avg Bid
    1 bids

    Hi A...can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be freezed after our final Estimation

    $493 (Avg Bid)
    $493 Avg Bid
    1 bids

    Hi ...can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be freezed after our final Estimation.

    $494 (Avg Bid)
    $494 Avg Bid
    1 bids

    Hi R...can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be Freezed based on final Estimation.

    $494 (Avg Bid)
    $494 Avg Bid
    1 bids

    My name is Preetam Singh Rathore. I'm designing a product. And for that purpose I need an android app which can transmit as well as receive the data from a BLE microcontroller.

    $172 (Avg Bid)
    $172 Avg Bid
    6 bids

    There is a circuit, which is generally a speaker one and an inverter one which composed of the microcontroller and few IC's. I have the code and circuit, you just need to simulate and make some changes if needed for the exact output.

    $19 (Avg Bid)
    $19 Avg Bid
    10 bids

    ...sensor ([login to view URL] ) should be realized. For this purpose, the Basys 3 FPGA board should be used. Furthermore, an 8051 microcontroller IP core([login to view URL]) is to be used, which takes over the control. The result of the brightness should be displayed on 7-segment

    $180 (Avg Bid)
    $180 Avg Bid
    9 bids

    ...implemented to cycle through modes. First mode to be clock display and second being sleep. Additional modes are MAG3110 magnetometer and temperature display (from NTC). The microcontroller is ATmega328p with Arduino Pro mini bootloader. The design has UART connection to Arduino IDE, which should serve to adjust the real time clock. Basic code to turn on

    $207 (Avg Bid)
    $207 Avg Bid
    13 bids
    $26 / hr Avg Bid
    15 bids

    ...software engineer, you will be responsible for design, development and testing of embedded software and firmware using HT5019 SOC. Job Description: .Develop firmware for microcontroller-based custom hardware (32 bit) .Evaluate, test, and review designs to determine if program will perform according to requirements and specifications .Plan, improve, and

    $1601 (Avg Bid)
    $1601 Avg Bid
    17 bids

    Most of the stage lighting use ...stage lighting use a protocol known as DMX. I want this protocol to be implemented using a microcontroller of my choice in C language. Once the protocol is implemented and we have some lights working, then it must be controlled wirelessly from another microcontroller that may have some potentiometers or buttons on it.

    $120 (Avg Bid)
    $120 Avg Bid
    4 bids

    I need a custom USB driver for Windows 10. The USB device is a STM32 microcontroller. Basically the driver and device needs to transfer data packets from the device to window and I need to be able to access the data in a C# demo program. This project involves developing the custom windows driver and the C# demo program. If you can do the STM32 device

    $1094 (Avg Bid)
    $1094 Avg Bid
    18 bids

    ...students. I have at my disposal these tools. 1) Microcontroller board ([login to view URL]) 2) TP4056 lipo charger 3) 2000 mAH lipo battery 4) Pair of PWM servos ([login to view URL]) What I want to do is use the built in touch sensor pins of the microcontroller board to control the servo. The microcontoller has

    $158 (Avg Bid)
    $158 Avg Bid
    23 bids