Microcontroller jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    5,000 microcontroller jobs found, pricing in USD

    I want to generate a waveform on an output on MPLAB. message me and I will provide you all the details

    $25 (Avg Bid)
    $25 Avg Bid
    12 bids

    We need to design a circuit that will monitor and log the temperature of a place and send it to server, the circuit will also need to determine its current position and send it to server too. The connection to server will be done through GSM module. We need to use an Atmel microcontroller, a DS18B20 temperature sensor and GSM module.

    $268 (Avg Bid)
    $268 Avg Bid
    37 bids

    Read the ADC using Potentiometer that show its values on a 7 segment display and read it in the laptop using the USB this work should be done using : 1 C language 2 Mplab X IDE 3 C8 compiler 4 PIC18F4550 5 Breadboard 6 Pickit3

    $75 (Avg Bid)
    $75 Avg Bid
    18 bids

    Programm a microcontroller. 4 buttons, 1 to turn on the display with interrupt. 1 to turn the display off into the interrupt. The other 2 are going to write a text on the display. Also a printable layout is to design.

    $202 (Avg Bid)
    $202 Avg Bid
    2 bids
    $43 Avg Bid
    4 bids

    1. Key Activities: Connect multiple web cameras to multiple OLED displays to view live stream video feed on the displays. Camera output signal is either HDMI Class 1.0 (720P-30) and/or USB UVC standard 1.1. Not sure what protocol the displays use. Deliverables requested: • Prototype drawings and/or de...standard 1.1. Not sure what protocol the displays use. Deliverables requested: • Prototype drawings and/or design schematics for Printed Circuit Board including PCB layout according to mechanical constraints (form factor) as detailed by me. • Sourcing of components: chipset identification and BOM, create netlist • Possibly?? embedded software engineering code for microcontroller programming to setup the chips' internal ...

    $4608 (Avg Bid)
    $4608 Avg Bid
    5 bids

    Looking for someone to write an iphone (eventually porting to android as well) app that can do the following: Securely connect to a device we make using a PIC32 microcontroller. Connection to be made either directly through bluetooth to the PIC32 device, directly through wifi to the PIC32 device, or through a wireless network using a configurable IP address. Communicate to and from the PIC32 device using a predefined list of ethernet commands. Interact with the user to turn on or off I/O using a graphical interface. Turn on or off graphical representation of I/O within the app. Save configuration files to a csv, text, or excel file on the mobile device.

    $2650 (Avg Bid)
    $2650 Avg Bid
    57 bids

    to design, test and develop an automated system that will measure the force of an object by placing a force sensor (FSR SENSOR) on prosthetic fingertip. the aim for it, is to apply pressure on to the object and convert the pressure into force using a programmed microcontroller. the force should be displaced on LCD board , also the output should go to an actuator (solenoid) which should apply the same force as was measured. also a report writing of all the data/program used/test basically a good report on every step taken through out the report. thank you

    $230 (Avg Bid)
    $230 Avg Bid
    4 bids

    Need someone to write C code associated with picKit 3 and PIC18F4550 Microcontroller that can read ADC and show the results on 7 segment LED display more details will be given in private the deadline is two days only

    $37 (Avg Bid)
    $37 Avg Bid
    36 bids

    We need th...alarm to a cellphone when find an alarm. We have an UPS connected with serial port to an modem, we need develop the software for this microcontroller. We have the UPS protocol , so the design consist in read the flags from the UPS via RS232 and if something wrong happend on the UPS the modem send the SMS to a cellphone. The microcontroller neeed to keep the cellphone number where need to send the SMS and also it can receive via SMS new cellphone numbers or erase other from the list. All project that we need is related with hardware becuase we already have the hardware. You can develop the project in C witht he microcontroller that you prefer. The microcontroller need to keep the number and male some basic functions like send the actual status or res...

    $340 (Avg Bid)
    Urgent
    $340 Avg Bid
    29 bids

    Project to design a piece of equipment which can run through our production process, and record some conditions. The system will consist of a microcontroller, 2 pressure transducers, and a humidity/temperature sensor. It will be measuring conditions from inside a dryer at ~ 110 degrees. The code needs to make it simple for the data from these sensors to be recorded onto a storage device (usb/sd card) which can then easily be uploaded onto a PC and transferred into an Excel sheet. The project is expected to be completed within the next 3 months or so, and over that time the code may need adjusting in order to make the equipment a reliable piece of kit.

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    26 bids

    I need to chill a tank of water about 12 litres to a specific temperature in the fastest amount of time, and I will also need to stir the water in the tank and dispense the water out. You will need to design the components and give me the spec...components and where to buy online. If you are able to build it, please indicate that. You will also be designing the pcb in EAGLE and send it to me. I like to use Arduino as the micro-controller. The size of the system should be kept to a minimal, and for any components that will be in contact with the water they should be food-safe. You need to have professional knowledge on peltier cooling, microcontroller (arduino), robotics (pumps, motors, etc..), pcb and circuit design. If will be good if you have industrial design knowledge. ...

    $548 (Avg Bid)
    $548 Avg Bid
    28 bids

    This project aims in designing a system which makes 230V AC lamp diming through Android smartphone possible. The lamp diming is done wirelessly through Bluetooth feature on smartphone. Microcontroller based system will be used as the dimmer controller. The project main components are the Bluetooth module that will act as a medium for connection between smartphone and light bulb. The smart phone will control the diming of the light bulb wirelessly. This happened by the communication of microcontroller based system with the Bluetooth function on smartphone. The Bluetooth module act as optical isolator with the AC part of the system, it is an open standard specification for RF based short-range connectivity for wireless communication. The operating system use by mobile devices ...

    $227 (Avg Bid)
    $227 Avg Bid
    24 bids

    I need help to fix/implement the wakeup function used in the ASF library to our Arduino library. Any experience with the Atmel ASF and SAM Microcontroller would is necessary. I think it´s not a big business but some knowledge in this field is necessary. Please contact me for further details.

    $93 (Avg Bid)
    $93 Avg Bid
    5 bids

    ...Controller) is intended to control the voltage of an induction/permanent magnet generator of a stand- alone micro hydro power generation. The generator voltage variation is in inverse proportion to the loading condition where ELC maintains constant loading of generator for continuous output power mode. The IGBT based DC chopping method is used for diverting excess power to the dump load using microcontroller for voltage sensing & control signal generation. The sensed voltage variation, is the reference to PWM signal generation, for the gate control of IGBT. Please refer to the attached PDF file. It contains a brief description regarding the working of an ELC. It also has a circuit diagram for an atmega328p based ELC along with its code. You may also refer to this link http:/...

    $7 - $18
    $7 - $18
    0 bids

    ...Controller) is intended to control the voltage of an induction/permanent magnet generator of a stand- alone micro hydro power generation. The generator voltage variation is in inverse proportion to the loading condition where ELC maintains constant loading of generator for continuous output power mode. The IGBT based DC chopping method is used for diverting excess power to the dump load using microcontroller for voltage sensing & control signal generation. The sensed voltage variation, is the reference to PWM signal generation, for the gate control of IGBT. Please refer to the attached PDF file. It contains a brief description regarding the working of an ELC. It also has a circuit diagram for an atmega328p based ELC along with its code. You may also refer to this link http:/...

    $21 (Avg Bid)
    $21 Avg Bid
    1 bids

    GSM based on off -- circuit and PCB layout design (PCB layout ready for fabrication (Gerber file). --Component 1) SIM800L (specified pins are keep accessible to microcontroller and user.) 2)ATMEGA328P SMD version (pro mini open source architecture with 8MHz and 3.3 V) 3) Voltage conflict management with lipo charging (power path management) (using this kind of IC MP2617) 4) Single phasing, reverse phasing, Unbalanced supply, Auto reset in such condition.( Reference circuit available) 5)two channel relay board and remaining I/O ports are kept outside with protection 6) Power supply(SMPS) for it (85-440V sustainable ) Block diagram and some specific requirement are discussed at finalising stage Compleat payment released after the project is successfully tested.

    $109 (Avg Bid)
    $109 Avg Bid
    9 bids

    Upgrade/Modify an existing oem car multimedia ISO image for ability playing video files. Car multimedia system is oem from Ssang Jong Tivoli plays only music files and i want it to play movies too - it seems to be blocked by default. Firmware is based on a V850 microcontroller with touch screen display. A full working ISO image is present. Need someone can analyze and modify the files to make it able to playback video files. For more details download the iso file at http://zambakotomotiv.com/ so you an analyze it and see if you are familar with this. You also can contact me [Removed for encouraging offsite communication which is against our Terms and Conditions.]

    $785 (Avg Bid)
    $785 Avg Bid
    3 bids

    Hardware and software based on Embedded technology /microcontroller for integrating into a Solar Power System for PAYG( Pay as You Go). The embedded hardware ( PAYG unit) locks or switches off the solar box when credit is down and unlocks the system( switch on) when the credit is added and adequate. 1. Hardware comprising microcontroller, crystal oscillator, resistor , IR sensor, MOSFET, LCD screen etc which will switch ON/OFF power automatically once Credit is used up. 2. Embedded software in the above hardware to run the required logics e.g switch on when Credit is added, switch off when credit has run out, displaying status on the LCD etc. 3. IR remote control to act as user input for keying in the required numeric code. 4. The freelancer should make a functioning pr...

    $3385 (Avg Bid)
    $3385 Avg Bid
    9 bids

    ...Controller) is intended to control the voltage of an induction/permanent magnet generator of a stand- alone micro hydro power generation. The generator voltage variation is in inverse proportion to the loading condition where ELC maintains constant loading of generator for continuous output power mode. The IGBT based DC chopping method is used for diverting excess power to the dump load using microcontroller for voltage sensing & control signal generation. The sensed voltage variation, is the reference to PWM signal generation, for the gate control of IGBT. Please refer to the attached PDF file. It contains a brief description regarding the working of an ELC. It also has a circuit diagram for an atmega328p based ELC along with its code. You may also refer to this link http:/...

    $446 (Avg Bid)
    $446 Avg Bid
    9 bids

    Hello, I am looking for an embedded system designer experienced with PIC programation. The program will have one user interface (most likely an I2C bus with a capacitive sensor), and one thermahl sensor (a thermocouple connected by SPI bus, MAX31855). The µcontroller will have to control by PWM (freq around 50kHz) a mosfet through a gate driver. The µcontroller will integrate a fuzzy logic controller. The programmer will first select the right PIC. Then the programmation of the µcontroller shall start according to the description above. The schematics will be provided. Do no hesitate if you have further questions.

    $605 (Avg Bid)
    $605 Avg Bid
    25 bids

    Hello, I am looking for an embedded system designer experienced with PIC programation. The program will have one user interface (most likely an I2C bus with a capacitive sensor), and one thermahl sensor (a thermocouple connected by SPI bus, MAX31855). The µcontroller will have to control by PWM (freq around 50kHz) a mosfet through a gate driver. The µcontroller will integrate a fuzzy logic controller. The programmer will first select the right PIC. Then the programmation of the µcontroller shall start according to the description above. The schematics will be provided. Do no hesitate if you have further questions.

    $554 (Avg Bid)
    $554 Avg Bid
    15 bids

    ...would like to add the ability to update the firmware from the running code. So I need a couple of functions. One function that receives the hex code and stores it in memory buffer. Another function to take the memory buffer and store it to the eeprom. We can pass in the CRC and size to ensure there is no corruption, if the file fails we simply return false. This will be for the stm32f4 microcontroller and should work on the stm32f4 discovery board. something like this Structure update update len update crc void initUpdate(update) // allocate memory buffer // store len and crc bool addNextByte(byte) // stores next byte to memory // on last byte verify crc bool applyUpdate() // takes buffer and writes to eeprom Code should be able to compile and run on a disco...

    $3930 (Avg Bid)
    $3930 Avg Bid
    5 bids

    Task Desc: Develop embedded software for microcontroller to acquire data from analogue signal. There are 4 channels and each channel has to be sampled and processed simultaneously. We have a dual core board based on ARM architecture ready, but if you wish to work on a different architecture, feel free to tell us and we will ship you the board and required electronic components. The code can be developed in C or C++. We will provide required libaries for Rs232 and lwIP to communication. Your task will be to develop the SWD ADC with required sampling rate, store the data in RAM or Flash, transmit data over Rs232 or TCP/IP. It is complicated to decide, who we give this project to. As a solution I have the task details with sample signals and information in the attachment. Please ans...

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    17 bids

    We would like to make a Revision of a current PCB designed in Eagle. The PCB is approx 30x30mm and includes several components. Current PCB-Design files and shematic will be provided. We think the changes are quite basic but any knowledge in Microcontroller, Electrical engineering would be helpful. Milestone will be descussed in advanced and can be adjusted to the necessary effort.

    $40 (Avg Bid)
    $40 Avg Bid
    38 bids

    Code debugging required for IAR Embedded Workbench project designed for stm32f101 microcontroller controller

    $600 (Avg Bid)
    $600 Avg Bid
    16 bids

    ...Signals from a handful of sensors are received. 2. Signals are processed by software on a microcontroller to produce the appropriate output signals. Software initially only needs to process the input signals by outputting a signal opposite to the input signals. This is to counteract shaking. The programming language and microcontroller used needs to be scalable in order to perform more advanced signal processing later on, and do things like display information on an LED screen. I essentially need a computer that can receive input signals from sensors, do calculations, and then output signals to power electronics and data to a monitor. 3. Power electronics that can take signals from the microcontroller (computer) and then control the force generated by small ele...

    $486 (Avg Bid)
    Featured
    $486 Avg Bid
    6 bids

    Hi sagarda7, I create this fake order so we can chat about our project. It's related to microcontroller + Android/iOS Thanks

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    Protection system provided as a Gas detector and fire detector are connecting to alarm sound and LEDs; which are represent the alarm audio and visual alarm. The gas detector and fire detector linked to the GSM the idea of GSM is transfer a message (SMS) to my phone and the fire station. ** For more security we are a...the thief entered the alarm audio and visual alarm are switched on. GSM will be transmitted a message (SMS) to owners and the police. This system has a fundamental point which is Keypad. The door is controlled electrically using keypad and GSM, the door opens and closes (manually) through a secret number enters in the keypad or wirelessly through GSM (transfer SMS ) The microcontroller STM32 MCU Nucleo is interfaced with my compo...

    $54 (Avg Bid)
    $54 Avg Bid
    7 bids

    I have source code assembler made for Atmega8 microcontroller. I would like it converted to Arduino Uno R3 which based on Atmega328p.

    $230 (Avg Bid)
    $230 Avg Bid
    9 bids

    Hi raulbehl, I just made this fake order to be able to chat with you about our project. It's related to PIC microcontroller + Android/iOS Thanks

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    Boot loader for pic 18f4685 Loads program from sd card connected with the microcontroller with pins: Chip select ra0 Clock ra2 Data in ra3 Data out ra1 First step: If the firmware is available on the sd it should firmware Second step: It should compare the version number of the firmware on the sd card and the one already on the microchip. Third step: The firmware needs to be encrypted and the bootloader should be able to unencrypt it Fourth step: Program the firmware into the microcontroller and reset.

    $271 (Avg Bid)
    $271 Avg Bid
    12 bids
    $29 Avg Bid
    35 bids

    I have designed a nolinear controller for drone using simulink in matlab. the controller works fine in simulation. now I want to implement this nonlinear controller experimentally to get drone (quadrotor) flying. this need to write c code from simulink (not generate c code from simulink directly, this will not be clean code and not good enough) then upload this code to board's microcontroller. more details will be discussed later.

    $191 (Avg Bid)
    $191 Avg Bid
    6 bids

    DTMF tone dialer code modification. The current code interfaces microcontroller (AT89C52) with a keypad, tone dialer IC and EEPROM to dial a 10 digit mobile number save in the EEPROM, and dial once external interrupt button is pressed. The code needs to be modified to remove the EEPROM interface and have #0 as the input to be dialed directly.

    $113 (Avg Bid)
    $113 Avg Bid
    9 bids

    I need to convert code from Atmega8 microcontroller to Arduino uno which is based on atmega328 microcontroller.

    $30 - $250
    $30 - $250
    0 bids

    Microcontroller develop I need you to develop some software for 2 Raspberry pi3 model B devices. This software is used for sending and receiving massages between these 2 devices. The massages need to be encrypted and decrypted by caeser encryption algorithm also the communication between these devices is by WiFi. The code is written by python language.

    $217 (Avg Bid)
    $217 Avg Bid
    12 bids

    I have a project which has a following structure: - there is a microcontroller controlling the DAC output - the DAC output is going to the two stages of amplification(op-amps) which is feed to the base of Darlington transistor - the collector of transistor is feed to the transformer(primary side) - the other end of primary side of transformer is triggered using a MOSFET, and when triggered it is connected to the ground The schematics really should be OK, but I seem to have problems finding a mistake. I have made the PCB already and it is not working. I need your help so we can find a mistake together. I can provide all required measurements you need, but you also need to recheck the schematics and PCB design.

    $39 (Avg Bid)
    $39 Avg Bid
    21 bids

    Need someone to build a project by using 1-PIC18F4550 2-Breadboard 3-Pickit3 you have to come up with good idea more details will be given later the deadline is one week

    $176 (Avg Bid)
    $176 Avg Bid
    18 bids

    ...would like to add the ability to update the firmware from the running code. So I need a couple of functions. One function that receives the hex code and stores it in memory buffer. Another function to take the memory buffer and store it to the eeprom. We can pass in the CRC and size to ensure there is no corruption, if the file fails we simply return false. This will be for the stm32f4 microcontroller and should work on the stm32f4 discovery board. something like this Structure update update len update crc void initUpdate(update) // allocate memory buffer // store len and crc bool addNextByte(byte) // stores next byte to memory // on last byte verify crc bool applyUpdate() // takes buffer and writes to eeprom Code should be able to compile and run on a disco...

    $3529 (Avg Bid)
    $3529 Avg Bid
    20 bids

    Realtime clock using picoblaze microcontroller on Spartan 6 FPGA board. it should show real time and have function to change time using push button.

    $96 (Avg Bid)
    $96 Avg Bid
    5 bids

    ...attachment, the circuit will consist of 44 x 7 Segments and 44 x Rectangle Leds. The 7 Segs and Rect Leds must be arranged as shown in the design. The circuit should contain a suitable microcontroller which will be programmed in C, the C code should have a single function which when called can light up any Led or Segment Led based on an address parameter, So for example to light up Segment A of the 1st 7 Seg Display I should be able to call a function like this "LightLed(0,true)", where 0 is the address and true is for turning it on or off. Secondly I would need to have a 4x4 matrix keypad interfaced with the microcontroller, detection of a keypress should be done via an interrupt whereby a function gets called on keypress and reads the keycode. Thirdly I w...

    $369 (Avg Bid)
    $369 Avg Bid
    35 bids

    Need someone to build a project by using 1-PIC18F4550 2-Breadboard 3-Pickit3 you have to come up with good idea more details will be given later the deadline is one week

    $109 (Avg Bid)
    $109 Avg Bid
    16 bids

    ...necessary. The CC2541 from TI is used. The freelancer has to use the BLE stack from TI (1.4). Schematics will be handed over on project start. Test environment is available. The acquired information on the BLE interface has to be displayed on an E-Ink Screen () connected to the SPI interface of the microcontroller. The stack should be configured as a Central/Observer device. The microcontroller should read and evaluate the advertising messages and connect to Hilti peripherals. The display has to display multiple full-screen background image and 6 Strings with variables (X,Y) positions. The content and X/Y position of the strings depends on the device connected to. The deliverables: The freelancer needs to sign our Consultant Agreement

    $542 (Avg Bid)
    $542 Avg Bid
    2 bids

    Write a CAN driver for S12XE microcontroller.

    $22 (Avg Bid)
    $22 Avg Bid
    2 bids

    I need someone to design a VERY basic 2G cellular board based on the HL6528RD from Sierra wireless that can interface with an Arduino. (Similar to the Adafruit Feather 32u4 FONA, but without the microcontroller, charger circuitry etc.) Additionally, the completed board and Arduino must be shipped to South Africa for verification and testing. (The freelancer price must include shipping). For evaluation, the board must be functional and be able to send an SMS when connected to the Arduino. The sketch to send an SMS must be pre-loaded on the Arduino. The board must be as small and simple as possible and must have the following: a) uFl antenna connector (For external antenna connection) b) PCB interconnect pins to interface with Arduino (as few as possible, only the required pin...

    $773 (Avg Bid)
    $773 Avg Bid
    14 bids

    I would like to have a ARM Cortex Microcontroller such the TMS570LC4357 Hercules from TI programmed to use the ARDUINO IDE. I am planning to add Accelerometer, Temperature and blood pressure sensors plus OLED along with a LiPo battery charger so it should have the libraries created to use ARDUINO IDE. I will created the PCB layout to populate with MIcro and sensors plus OLED and battery and I will just need the code to load it on the micro and the libraries to use ARDUINO IDE, I am open for suggestions on the type of sensors, the OLED I am intended to use a 16x16 OLED

    $514 (Avg Bid)
    $514 Avg Bid
    8 bids

    URGENT project-24 hrs: I need an Altium Designer project (schematic, BOM, and PCB layout; firmware not required): Arduino uno style board/microcontroller with USB power or battery power option that will drive 7-segment displays. Audio circuit amplifier for microcontroller to drive speaker/buzzer (1-pin). 1 PCB with 3 sections (each section will be cut and connected by ribbon cables to main section): 1 rectangular section for (qty 4) 7-segment display 1 rectangular section section for (qty 2) 7-segment display 1 rectangular section for microcontroller + circuitry Additional requirements *Source all components from Conrad Electronics (Europe) *Use surface mount components no smaller than 1206. *Use SOIC or QFP packages for the ICs if possible. Avoid QF...

    $61 (Avg Bid)
    $61 Avg Bid
    6 bids

    URGENT project-24 hrs: I need an Altium Designer project (schematic, BOM, and PCB layout; firmware not required): Arduino uno style board/microcontroller with USB power or battery power option that will drive 7-segment displays. Audio circuit amplifier for microcontroller to drive speaker/buzzer (1-pin). 1 PCB with 3 sections (each section will be cut and connected by ribbon cables to main section): 1 rectangular section for (qty 4) 7-segment display 1 rectangular section section for (qty 2) 7-segment display 1 rectangular section for microcontroller + circuitry Additional requirements *Source all components from Conrad Electronics (Europe) *Use surface mount components no smaller than 1206. *Use SOIC or QFP packages for the ICs if possible. Avoid QF...

    $282 (Avg Bid)
    $282 Avg Bid
    16 bids

    The project is to develop firmware codes, make fully functional 3-4 breadboard PCBs as samples, possibly use our company developed hardware design. Work includes schematic, breadboard pcb, fully tested and debugged firmware codes and use Code Composer to program the microcontroller. This is a simple test project. If it works well, on projects that are more complicated in the future. The project is a simple “Current Transducer” with 4 – 20 mA output signal. It is based on TI MSP430FR2110 due to its cost and specifications.

    $920 (Avg Bid)
    $920 Avg Bid
    5 bids