Usb avr programmer jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    3,773 usb avr programmer jobs found, pricing in USD

    I have some problem to boot my laptop(brand is BYONE) from usb. When I choose usb item from the booting menu, nothing is happened. I think there is some BIOS setting issue. I can pay 6 usd for this issue. Thank you!

    $2 - $8 / hr
    Local
    $2 - $8 / hr
    0 bids

    we make power meter and it has usb connection to pc and data to be display on pc and it should be transfer to excel worrd etc

    $394 (Avg Bid)
    $394 Avg Bid
    4 bids

    Design a BLDC motor controller 500W using any atmega series and code using avr studios.

    $145 (Avg Bid)
    $145 Avg Bid
    10 bids

    ...projects with the board beaglebone black Rev C. I has installed Linux Debian, wheezy distribution, 3 serial ports enabled; ttyO0, tty01, tty02, it works with a screen adafuit HDMI, USB touch screen, the software is developed with Qt5, so the file system includes a toolchain and packages for cross compiling from windows. Now I am planning to use a waveshare

    $358 (Avg Bid)
    $358 Avg Bid
    10 bids

    I have firmware in C for a MikroElectronika "PIC Clicker" development board using a PIC18F47J53. It includes MikroE's USB library for CDC (USB RS232 emulation). Works fine on Windows, but on a Mac (e.g. OS-X 10.9.5) it registers a /dev/[login to view URL] port but doesn't communicate (hangs on host write to board). On Linux, it creates a /dev/ttyACMXX port

    $1507 (Avg Bid)
    $1507 Avg Bid
    10 bids

    Kernal Driver for windows 10. Kernal Driver receives a message from a USB device. Converts it to look like a message from second USB device. Send message to Application which receives messages from USB Device. Driver is to be used to allow new USb device with new id to communicate with existing Application witten in c#

    $724 (Avg Bid)
    $724 Avg Bid
    9 bids

    Mini-USB dongle with a mono phono input. The phono input is a 12v trigger input.

    $365 (Avg Bid)
    $365 Avg Bid
    7 bids

    ...this project reed this carefully: - The AVR system should output an AC voltage of 240 V at 50 Hz automatically for an AC input voltage in the range of 180 V to 260 V. Otherwise, the AVR system should shut off. - The output voltage regulation range should be +2% to -2% of the nominal output voltage. - The AVR system should also be able to perform the

    $311 (Avg Bid)
    $311 Avg Bid
    14 bids

    ...input voltage in the range of 180 V to 260 V 50 Hz and output an AC voltage of 240 V at 50 Hz. Otherwise, the AVR system should shut off. - The output voltage regulation range should be +2% to -2% of the nominal output voltage. - The AVR system should also be able to perform the following tasks: surge suppression, short circuit protection and harmonic

    $233 (Avg Bid)
    $233 Avg Bid
    3 bids

    I need to develop a library to interface an Arduino (UNO R3 or Leo) as USB HID haptic device. While basic USB HID gamepad library for Arduino exists in open source universe, I need one with Force feedback support. So in effect I should be able to program an Arduino so that when connected to a PC it should be read as a HID Gamepad with force feedback

    $995 (Avg Bid)
    $995 Avg Bid
    10 bids

    I have api on localhost that send hello world message in json. It has been tested on Chrome Postman extension and works. I want to access tha...localhost that send hello world message in json. It has been tested on Chrome Postman extension and works. I want to access that JSON data from localhost on real device through USB. Have you done it before?

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    3 bids

    Some years ago, I started a project to build a USB Audio DAC to connect to a computer and listen to music. The DACs are based in Arduino and WM8741 chips. I also made an Android APP to control the DAC with Arduino Bluetooth connection, the problem is I do not have time to evolve the project, and I need qualified help.

    $114 (Avg Bid)
    $114 Avg Bid
    9 bids

    For my 3amp, 18w ultra fast smart phone charger with single USB slot, I want mass production of it for minimum 1000 quantities. And for reference here I have attached sample images with dimension and my aim is to go for readily available mold with nearly same dimension and shape so as to save cost for die making process involved in it. So in order to

    $99 (Avg Bid)
    $99 Avg Bid
    15 bids

    We are building an IOT product (hardware) which would handshake with an android / windows runtime (application) via BLE, WiFi, USB (one of them at a time). After connecting with one or more devices, the runtime would send requests to these nodes retrieving data from a database. It would also display data based on the response received from the nodes

    $361 (Avg Bid)
    $361 Avg Bid
    8 bids

    I would want a firmware developed on ESP 32 that would have Wifi, BLE, USB communication to external environment (Phone / Cloud) and would communicate with a CAN enabled system such as a vehicle on the other side. The firmware should also have mesh network enabled. Can discuss more details on the project personally. Would prefer a developer from the

    $1181 (Avg Bid)
    $1181 Avg Bid
    10 bids

    I want to build a system by which when user uploading pdf files to serve(PHP and Mysql) using form ...uploading pdf files to serve(PHP and Mysql) using form submit from browser then before uploading files to serve they should get signed with digital certificate stored in smart card (USB Token). This should work in windows as well as linux environment.

    $285 (Avg Bid)
    $285 Avg Bid
    5 bids

    For my charger manufacturing business, I need smartphone charger cabinet or enclosure designer and manufacturer and initially I need to get single USB charger cabinet manufactured and material to be used should be of high quality like premium PC materials with its features like heat resistant, fire resistant, drop resistant, corrosion resistant, compact

    $78 (Avg Bid)
    $78 Avg Bid
    26 bids

    We have built a POS system and we have one element outstanding which is to print a receipt on our EPSON terminal printer locally on USB. We need source code which will first detect the default printer and print a certain document . A tip would be using QZ which can be found on [login to view URL]

    $210 (Avg Bid)
    $210 Avg Bid
    5 bids

    I will supply an APK that was wrote to work on a native android device with NFC reader and i need to be adapt to an Android device that have a USB NFC reader. i will provide the reader drivers from the USB NFC reader.

    $453 (Avg Bid)
    $453 Avg Bid
    9 bids

    A freelancer is need to write a USB mass media interface for legacy MS-DOS. This should be coded in C++ using the OpenWatcom compiler. The program will need to be written as a 32-bit protected mode executable. Along with the program, a test program should be provided. The test program should also be compiled as a 32-bit protected mode program. The

    $336 (Avg Bid)
    $336 Avg Bid
    6 bids

    PCIE USB 3.1 and 10 GB Ethernet card with trigger, Galvanic Isolation and drivers. 3D cad drawing a electrical simulations as part of delivery.

    $692 (Avg Bid)
    NDA
    $692 Avg Bid
    12 bids

    Looking for a Linux sysadmin who have experience with serial port settings, serial communication. I want to use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need

    $17 (Avg Bid)
    $17 Avg Bid
    7 bids

    Who can help me to build any tool which enables a remote connected remote usb PC to act as if, is connected to my own computer. I want to be sharing my usb software remotely.

    $30 (Avg Bid)
    $30 Avg Bid
    2 bids

    I needed a tool or software which will enable me to remotely share my usb with other remote computer(s). Example, for unlocking purposes

    $30 (Avg Bid)
    $30 Avg Bid
    3 bids

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    $52 (Avg Bid)
    $52 Avg Bid
    3 bids

    I currently have firmware that reads a DS1820 temp sensor and transmits the data through RS485 when requested. Currently, the firmware pauses for 750 mS while the temp conversion occurs then responds with the current value. I'd like to modify the firmware so that it always replies with the last completed conversion and constantly be converting the next reading in between requests. The idea be...

    $38 (Avg Bid)
    $38 Avg Bid
    3 bids

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    $77 (Avg Bid)
    $77 Avg Bid
    8 bids

    There is a led on the cypres fx3 chip board. This function is to turn on the LED by pressing the button on the winform. uvc communication (1.1) version Using the extension unit command guidExtensionCode: {63610682-5070-49AB-B8CC-B3855E8D221D} By sending the extension unit command 0x0D through the above GUID, the LED control Since the maximum value is set to 9, the minimum value is set to 0, ...

    $10 - $30
    $10 - $30
    0 bids

    This interface will be based on the Cypress EZ-USB chip and will be driven by a C/C++ program running on the PC. The C/C++ program will be written in modular format, with functions for each individual elementary/basic control of the devices that we want to control or monitor. Since this project will be part of a course for student training, all software

    $174 (Avg Bid)
    $174 Avg Bid
    3 bids

    ...take photos. Type of freelancer you're looking for - Never stop challenging - Can be manage the project and do the scratch development - iOS developer who has knowledge of UVC(USB video class) and OpenCV ref- [login to view URL] Anything unique about the project or team - The Github and the Jira will be use

    $1249 (Avg Bid)
    $1249 Avg Bid
    38 bids

    ...PC->HDMI->FPGA->HDMI->Monitor 2) PC->USB-> FPGA 3) The PC will send information to the FPGA and create an overlay on the monitor. This software on the PC could be coded in C++ or C. Example, DrawText(x, y, "Truck #19 ready for shipment.") There are many samples online but my knowledge is too limited to combine USB communication and Drawtext or shapes

    $356 (Avg Bid)
    $356 Avg Bid
    7 bids

    HELLO, I NEED TO ADD PRINT FEATURE via usb and bluetooth to an existing app with option on/off autoprint, number of copies i have code you can use it to generate the apk using phonegap

    $238 (Avg Bid)
    $238 Avg Bid
    12 bids

    1. way to check if there is any USB TOKEN / SMARTCARD with certification. 2. querythe device for some "string" in the description 3. send "PIN" to the device. 4. get certificate to sign document. all writen in DELPHI, can use OpenSSL or PKCS#11 pr PCSC dll or what evere needed. all must be free from any Copyright to any therd side

    $631 (Avg Bid)
    $631 Avg Bid
    3 bids

    I am looking a source code of MT7601U Wireless USB wifi adapter Windows Driver. If you can develop it or have it, please bid for me. Thanks.

    $4119 (Avg Bid)
    $4119 Avg Bid
    6 bids

    In order to use Dosbox Emulator on Android devices, we must be able setting the usb port to serial port function, thus, our DOS application will have communication with external serial devices.

    $577 (Avg Bid)
    $577 Avg Bid
    8 bids

    ...makeup a program for a agricultural implement guidance controller. I have not compile the C code for over 8 years and am out of touch with to process. I originally used the AVR-GCC compiler version 3.4.5. The design used the MCU ATMega161 which is now obsolete. The source code needs to be compiled for the ATMega16A. I could spend untold time trying

    $472 (Avg Bid)
    $472 Avg Bid
    12 bids

    I need to implement an existing project (AVR194 application note) to work with my setup. There are things that I do not need and things I want to be added. Like, for example, PC6 pulled to high, then after 100ms, PB3 pulled to high, get current value on PD1 and pull PC6 low if overcurrent occures, not via a shunt like in app note.

    $138 (Avg Bid)
    $138 Avg Bid
    7 bids

    We are looking for USB chargers ID design,including USB Home chargers,USB Car chargers,Multi-USB charging stations with unique and compact design

    $170 (Avg Bid)
    $170 Avg Bid
    10 bids

    ...(with simple switch or similiar). The device must be connected with a computer with USB. On the computer, I have a software where I can define, at which number of device the LED should switch on. 100-200 of that device will be conncted to one computer, so I'm not sure, if USB is the best way to connect. Maybe a differnt way is much better, or a optical connection

    $1644 (Avg Bid)
    $1644 Avg Bid
    39 bids

    Generate a few types of waveform with sampling rate of at least 50kHz Waveforms need to display from a range of frequency from ...types of waveform with sampling rate of at least 50kHz Waveforms need to display from a range of frequency from 1Hz to 10kHz and a controllable voltage offset Strictly using AVR C, ATMEGA32 and Digital Analogue Converter

    $16 (Avg Bid)
    $16 Avg Bid
    8 bids

    I am looking for some .Net code that will allow me to reliably send text commands directly to a USB port (not through windows print spooler).

    $401 (Avg Bid)
    $401 Avg Bid
    7 bids

    I need the code to realize an hygrometer/thermometer based on Atmel microcontroller (Attiny 85/ 84 or other avr microcontroller). I wish to read the values from the SHT 31-D sensor and proportionally rotate two stepper motors driven by DRV 8825. Each motor rotates a pointer on a dial to indicate humidity and temperature.

    $230 (Avg Bid)
    $230 Avg Bid
    21 bids
    Trophy icon Sales USB website Ended

    We are in the process of creating a "website" that will be put on a USB to give to customers at Trade Shows. The website needs to be able to load and run with no internet connection. We have started this as seen in the attached dropbox link. Please use the information as a base for the website. We will need to be able to add pdf, pictures, and videos

    $200 (Avg Bid)
    Featured Guaranteed Top Contest
    $200
    18 entries

    Add digital Flow sensor to existing code for Mini Arduino Pro (ATmega328P): 1) The flow sensor provides a pulse signal from a hall-effect sensor. 2) The sensor will read the water flow through the heater and the results will be an additional condition for turning the heater element on or off, similar to the pressure sensor. 3) The MCU will count the pulses per second (Hz) (or perhaps we break it...

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    6 bids

    Hi. I want to build a smaller version of the fly/mosquito racket/swat and I want to have a charging by USB capability

    $243 (Avg Bid)
    $243 Avg Bid
    8 bids

    Need C code in avr studio with mega 32 for VL53L1X , code need to measure distance to 4m, library with function init, start measure, stop measure, read measure, change ranges

    $237 (Avg Bid)
    $237 Avg Bid
    4 bids

    I need you to develop some software for me. I would like this software to be developed using C or C++. Use pic18lf45k50 to be a mass storage usb device with ability to write/append to file using SD card

    $49 (Avg Bid)
    $49 Avg Bid
    5 bids

    I need you to develop some software for me. I would like this software to be developed using C or C++. To make a pic18lf45k50 appear as a mass storage device with and sd card using mplabx and xc8. with ability to write/append to a file

    $226 (Avg Bid)
    $226 Avg Bid
    10 bids