Network Engineering Jobs

Location" Czech Republic, Děčín, installation and first-time activation of two Fortinet units together with two uCPE devices. The work includes mounting, cabling, initial power-up, and loading a clean base image so both Fortinets run with their standard security settings; no custom firewall rules or advanced VPN features are required at this stage. Once the hardware is online you will register the Fortinet licenses, complete their basic setup wizards, confirm that traffic flows correctly through the default security profiles, and link each Fortinet to its paired uCPE. A short hand-over document outlining IP information, admin credentials, and the steps you followed will conclude the job. Deliverables: • On-site physical installation of 2 × Fortinet + 2 × uCPE...

Vodafone circuit port 1 needs to be patched directly into the Fortinet firewall’s WAN interface at Siderno C.C. La Gru, Italy. The link is pure Ethernet, so the scope is limited to the physical layer: run or repatch the RJ-45 cable, secure both ends, power-cycle if necessary, and confirm the link LEDs come up on both the Vodafone hand-off and the FortiGate. Deliverables • Ethernet patch from Vodafone port 1 to Fortinet WAN • Photographic proof or brief confirmation showing link status (green LEDs or interface up) Teams link for remote support will be provided

I need a technician who knows Cradlepoint hardware to visit a retail store in Glasgow and set up a W1850 5G router. The unit must be mounted and powered in the back office, then activated so the 5G link is live and visible in NetCloud Manager. Once the SIM is registered, confirm the internet connection, apply the default profile I will supply, and hand back the admin credentials. The shop will stay open while you work, so I’m counting on you to keep noise and disruption to a minimum; if an after-hours visit suits you better, just let me know so we can arrange access. Please bring the usual tools—drill, patch leads, cable ties, signal tester—and leave the cabling neat and labelled when you are done. Deliverables • W1850 securely mounted in the back office • D...

proxmox: network, routing, network interfaces, needs to be configured. need an absolute expert i have a single server with 2 Nics (one to hetzner, one to a 1 gb switch) and a 4 node cluster with 4 NICS (nic0 is connected to ISP, NIC1 is connected to the 1 gb switch, and 2 x 10 gb NICs). i need somebody with in_deep knowledge about networking. NO GUI IS AVAILABLE only working on my notebook No trolls needed. if i see you klick around and have no idea, i cancel the job (i can do itmyself, actually, i do it and it hasent worked out) AND STOP, BID ON THE JOB AND CHANGE THE PRICE LATER, AND ALSO NOT IF YOU TELL ME YOU NEED 3 DAYS, IF YOU KNOW WHAT YOU ARE DOING - ITS maybe 3 hours

I’m bringing a brand-new Arista DCS-7050SX3-48YC8-F online and need a smooth software rollout under EOS. The hardware is already on site and cabled, so the engagement is strictly about software configuration. Here’s what I need: • Guide me through the initial boot process, image verification, and any Zero-Touch Provisioning or USB methods you prefer. • Build a clean, best-practice base configuration that covers management VLAN, access and trunk ports, STP, basic L2/L3 features, and secure remote access (SSH, RADIUS). • Provide a concise recommendation on the LIC-FIX-2-E licence—when it becomes essential, what functionality it unlocks for this model, and the most practical route to purchase and apply it. Deliverables will be the final running-con...

I am building a fresh lab in Cisco Packet Tracer and need a complete, working topology from scratch. The network must use both switches and routers, and I want three core services in place: • Dynamic IP assignment through properly scoped and tested DHCP pools • Segmented traffic via correctly trunked VLANs • Traffic control using well-planned ACLs that clearly demonstrate permitted and denied flows Hand the file back to me in .pkt format with a brief text summary of the key commands so I can study what you did. Make sure every PC can reach the correct gateway, the DHCP server hands out the right addresses per VLAN, and the ACLs block or allow traffic exactly as documented. Don't need campus level project just bit more than basic type don't have much time t...

I’m bringing a brand-new Arista DCS-7050SX3-48YC8-F online and need a smooth software rollout under EOS. The hardware is already on site and cabled, so the engagement is strictly about software configuration. Here’s what I need: • Guide me through the initial boot process, image verification, and any Zero-Touch Provisioning or USB methods you prefer. • Build a clean, best-practice base configuration that covers management VLAN, access and trunk ports, STP, basic L2/L3 features, and secure remote access (SSH, RADIUS). • Provide a concise recommendation on the LIC-FIX-2-E licence—when it becomes essential, what functionality it unlocks for this model, and the most practical route to purchase and apply it. Deliverables will be the final running-con...

I have a brand-new Cisco Catalyst 9300 already delivered to the data room and I need an experienced field engineer on site to see the job through from powered-off hardware to a fully verified switch in production. Here is what I expect you to handle: • Pre-installation readiness: confirm power requirements, prepare the rack rails, and run or tidy the necessary copper and fibre cabling so the switch can slot straight in. • Physical installation: safely rack-mount the 9300, connect power, management, and uplinks, and apply proper cable management. • Initial configuration: bring the switch online with a clean, best-practice base config that I can build on later. The FE will need to provide console access to GTT remote engineer, please note that Cisco 9300 is with USB-A ...

Hi want a project haproxy what a friend recommend so i want the sams

I'm seeking an experienced network specialist to design a robust home network. The primary use will be for working from home, and it needs to support more than 10 devices. Key Requirements: - High-speed and reliable connectivity - Create a supply list - Ability to handle multiple devices without lag Ideal Skills: - Proven experience in designing home networks - Strong knowledge of security protocols - Ability to create a scalable network solution Please include your past work and relevant experience in your application.

More details: Which specific areas do you need mentorship in? Configuration issues, Security policies, Traffic management What kind of configuration issues are you facing? This question was skipped by the user Which specific security policies do you need help with? This question was skipped by the user

Part-Time US Tester Needed – Short-Term Router Compatibility Test We are looking for short-term part-time testers located in the US to conduct router compatibility testing on home broadband networks. Requirements: Currently reside in the US Have stable home broadband service (Spectrum, Comcast, AT&T preferred) Able to follow test instructions and provide feedback Willing to allow occasional remote access for log analysis and troubleshooting Basic network operation skills What we provide: Test units will be shipped directly to you Clear test guidance Remote support from our R&D team Job Content: Complete router setup and broadband dial-up tests Conduct speed and network stability tests Assist with remote log checks when needed Submit test results, screenshots and simple record...

I need to keep my “Dbx” browser-based account open on two separate Windows laptops at the same time. Right now the admin side forces a single-user restriction, so the second machine is kicked off as soon as the first one connects. My plan is to route both laptops through the same VPN exit point (I already have a specific VPN provider in mind and will share the credentials) so the service sees them as one device or at least allows parallel sessions without triggering the lockout. If you know a cleaner technique that still runs through my chosen VPN, I’m open to it, but the solution must respect the provider I’m already paying for. What I expect from you: • A tested configuration or script that lets both laptops stay logged in simultaneously. • Cle...

I’m looking for a professional Network Security engineer (not just a trainer) to provide 1-on-1 coaching with a strong focus on real-world, hands-on experience. My goal is to reach an advanced level in Network Security, with a primary focus on Palo Alto (PCNSE level), supported by solid CCNP-level networking knowledge. My current level is intermediate (CCNA + firewall experience), and I’m not looking for basic theory. I want to strengthen my practical skills, especially in troubleshooting and real enterprise scenarios. The training must be hands-on using EVE-NG, building a full topology that grows over time (HQ, Branch, ISP, Firewall, VPN, etc.). Key focus areas: - Palo Alto advanced configuration (Policies, NAT, VPN, Threat Prevention, Logs) - Troubleshooting (this is crit...