Find Jobs
Hire Freelancers

Basic Circuit Design - Synced PWM

$30-250 USD

Completed
Posted almost 9 years ago

$30-250 USD

Paid on delivery
Just a simple circuit to generate a pulsed signal from an incoming sine signal. It will be used to drive a strobe light synchronised to the incoming sinusoidal signal. The length of the output pulse should be proportional to the frequency. i.e. 10% and adjustable. The trigger voltage should be adjustable for adjusting the phase relationship between in and out. I just need basic diagram, no need to add regulators, filtering caps etc..
Project ID: 7724281

About the project

26 proposals
Remote project
Active 9 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
"The length of the output pulse should be proportional to the frequency. i.e. 10% and adjustable."- This is not obvious. Is this mean that "The higher the frequency of input sine signal, the longer the output pulse, thus the lower the output pulse."? I think that your project can be done by using comparator, frequency to voltage converter, so on...
$50 USD in 3 days
4.9 (9 reviews)
3.6
3.6
User Avatar
Hello, I have this circuit ready with me. I used the circuit to trigger the photo-triac. Photo-triac can be replaced with the LED. I can give the simulation results also, so that you can verify that the circuit is working. You may message me for discussing more details.
$50 USD in 3 days
0.0 (0 reviews)
0.0
0.0
26 freelancers are bidding on average $110 USD for this job
User Avatar
hi sir i am an expert electrical engineer i can do it for you. please share the further details. i am waiting for your reply regards
$105 USD in 3 days
4.9 (187 reviews)
7.7
7.7
User Avatar
I am an Electrical Engineer having specialization in Electronics and Control, working as Lab Engineer at FAST National University Pakistan, at Electrical Department. Now a days i am also doing my MS degree in Electrical Engineering with specialization in Control. I have conducted the labs for followings subjects, and also supervised Projects related to these subjects. 1. Control System Design & Modelling (Matlab & Simulink) 2. Digital Logic Design (Verilog, VHDL) 3. Digital System Design (Verilog, VHDL) 4. Computer organization & Assembly Language (8086 processor, 8051 controller) 5. Electric Machines 6. Circuit Analysis and Design etc. I assure you, if you assign your project to me, you surely gonna work with me in future.
$111 USD in 2 days
4.8 (176 reviews)
6.7
6.7
User Avatar
Hi... I have 5+ years of experience in the field of electronics. I am working on different industrial based project where my primary role was to design embedded system, programming of micro-controller and system implementation. You can check out my portfolio for my work information and my qualification. I have worked on number of project based on different platform including heartbeat monitoring system, chemical detection robot for pharma industry, autonomous robots, cap sense based home automation system, GSM security system and many more. Expect your work done within deadline with best quality..... Please let me know any thing you need to know in personal message. And please message me detail requirement of your project, so we can discuss on it.... Thank You
$140 USD in 3 days
4.8 (43 reviews)
6.0
6.0
User Avatar
Предложение еще не подано
$210 USD in 5 days
4.9 (26 reviews)
5.9
5.9
User Avatar
Hello Sir, I went through your project proposal and it's very interesting and I would like to work on this project. Why you should hire me ? * I have four year experience as a freelancer and I am very efficient. * I have many good feed backs. Please visit this link and see for yourself some of my feedbacks on freelancer.com https://www.freelancer.com/u/Anthony989.html *I work full time as a freelancer and I will work as planned,on time. * I have very attractive milestone payment system that benefits both parties and ensure employer-employee trust. I need few things to discuss. Please contact me if you are interested. I am keenly waiting.
$111 USD in 3 days
4.7 (34 reviews)
6.1
6.1
User Avatar
I'm an Electrical Engineer in Communications and Electronics. I have experience in microcontrollers programming, including PIC and AVR. I have experience in designing electronic circuits for specific industry tasks. I hope I can help with this project Best regards
$160 USD in 7 days
5.0 (7 reviews)
4.8
4.8
User Avatar
Circuit will be designed and schematic drawn, 1) The duty cycle proportional to input frequency -adjustable manually. 2) Trigger level for threshold adjustment (like oscilloscope) I just rephrased what I think is your requirement. The trick is to use a frequency to voltage converter and then use a simple voltage-PWM generator, the generator's clock is threshold synced by input waveform.
$155 USD in 1 day
5.0 (10 reviews)
4.2
4.2
User Avatar
Hi. I am a professional Electronics Engineer having expertise in Circuit designing. I have done many of the projects same to your's and have their simulations too. I can provide you the work solution in some hours ( 0 Days ) Contact me i am waiting for you.
$100 USD in 0 day
4.6 (13 reviews)
4.7
4.7
User Avatar
A proposal has not yet been provided
$133 USD in 10 days
5.0 (11 reviews)
3.8
3.8
User Avatar
I recently finished my fourth year of undergraduate electrical engineering at Carleton U. I have 2+ years of experience in designing pulse-generating circuits with incoming sinusoidal signals as inputs. With more details as to what format the design is to be done on, I am confident I can complete it in no time.
$55 USD in 3 days
4.8 (9 reviews)
3.8
3.8
User Avatar
A proposal has not yet been provided
$155 USD in 5 days
3.1 (7 reviews)
5.6
5.6
User Avatar
A proposal has not yet been provided
$55 USD in 3 days
5.0 (2 reviews)
2.1
2.1
User Avatar
Hello, I am a Hardware and Firmware Developer cum Schematic/PCB Designer, having 9+ years of experience. Expertise in Arduino, AVR, PIC, 8051 programming. PCB/Schematic design expertise in Proteus, Altium, Eagle, Orcad. Also having expertise in using Simulators like Proteus, Multisim, PSpice. So, I can simulate this project just in some hours. And if u want some changes in the result as per your specific requirement, it can be easily done. I already design the type of circuit u required. Thanks Sapna Surve
$30 USD in 1 day
5.0 (2 reviews)
1.8
1.8
User Avatar
Respected sir, I am an electrical engineer , and i already did this project of SVPWM(space vector pulse width modulation) i hope you would give me a chance . i did simulation of SVPWM too. so may be i can help you
$55 USD in 2 days
4.7 (2 reviews)
1.5
1.5
User Avatar
Hello, I am professional prototype engineer with 6 years experience in big automotive company. Looking forward to working with you!
$55 USD in 30 days
5.0 (2 reviews)
1.3
1.3
User Avatar
I can make the diagram(circuit)its very easy,without the other components,its probably for controlling a motor.
$155 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
A proposal has not yet been provided
$111 USD in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Will need to know frequency range (max/min) and if the circuit must be input amplitude independent or not. If so, what amplitude range (max/min) does it operate over. Circuits that self-adjust (using feedback loops) to dynamically track changes in the input signal will inherently have a response time limitation. Having both a fast response time with also being able to cope with very low frequency inputs becomes a challenge and might better be done digitally. If the range of variation in input frequency and amplitude is not too huge (>= 3:1 ratio) and you can tolerate a fixed response time equal to roughly 10 cycles of your lowest input frequency, then an all analog circuit is a reasonable approach. If however, your range of variation on frequency is much wider or you demand very fast response time, then you become forced into using digital techniques forat least some of feedback control. Are you ok with this???
$55 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I know microcontroller and processing
$200 USD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
A proposal has not yet been provided
$155 USD in 3 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED KINGDOM
Alsager, United Kingdom
5.0
17
Payment method verified
Member since Mar 12, 2010

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.