Find Jobs
Hire Freelancers

Create PCB layout in Eagle based on schematic drawing

$2-8 USD / hour

In Progress
Posted almost 9 years ago

$2-8 USD / hour

I have a schematic drawing that I wish to have a PCB layout created for. It should be a small board (less than 10cm x 10cm; approximately 50 components) and single sided. Prefer it would be created in Eagle - if not, I would need all Gerber files and BMP images of PCB. I will send PDF file of schematic to winning bidder only due to proprietary concerns. Should be simple project for anyone experienced in PCB layout design.
Project ID: 7476615

About the project

46 proposals
Remote project
Active 9 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
For PCB layout designing, I'm using CadSoft Eagle and I have done many PCB layout designing in CadSoft Eagle. I can create the PCB layout for your requirement and I'll provide you the gerber files. If you wish, I can show you some of the PCB layout I did. All are in industrial standard. If you are satisfied with my experience, hire me. I'm always ready to communicate with you for further details. Thank You.
$3 USD in 3 days
4.7 (2 reviews)
1.2
1.2
46 freelancers are bidding on average $7 USD/hour for this job
User Avatar
I am an Electrical Engineer having specialization in Electronics and Control, working as Lab Engineer at FAST National University Pakistan, in Electrical Department,I have conducted the followings Labs, and also supervised Projects related to these labs. 1. Control System Design & Modelling (Matlab & Simulink) 2. Digital Logic Design (Verilog, VHDL) 3. Digital System Design (Verilog, VHDL) 4. Computer organization & Assembly Language (8086 processor, 8051 controller) 5. Electric Machines 6. Circuit Analysis and Design etc. I assure you, if you assign your project to me, you surely gonna work with me in future.
$7 USD in 3 days
4.8 (173 reviews)
6.8
6.8
User Avatar
Hello, I have been associated with Hardware design (Circuit / Electronics design), PCB design, PCB Manufacturing, Component procurement, PCB Assembling and Functional testing for over 7 years. I have used various CAD/EDA tools for PCB design. I'm having good experience in Eagle. I will provide the PCB Manufacturing, Component procurement, PCB Assembling & Functional testing services too. I look forward to hearing from you! Wish you a nice day! Thanks & Regards, Karthik
$15 USD in 4 days
4.8 (125 reviews)
6.7
6.7
User Avatar
Hello, I already finish small project 54 items 55mmx65mm. I will do it in Eagle sw. I can sed you my referance samples. Yours Truly, Ali ŞERBETÇİ
$8 USD in 20 days
5.0 (33 reviews)
6.5
6.5
User Avatar
A proposal has not yet been provided
$5 USD in 3 days
4.9 (88 reviews)
6.4
6.4
User Avatar
Hi, we will deliver you PCB layout and gerber files. Please provide us schematics to move further. Regards, Shahbaz.
$7 USD in 10 days
4.6 (52 reviews)
7.0
7.0
User Avatar
Hello. Im designing different electronics devices, mostly based on avr, arm MCUs and boards with them like arduino, stm-discovery etc. I can help you with your deal and since im new one here I can do it cheaper then anybody. (autopromotion^)) I prefer to do such works in diptrace. But also I can in eagle if you want. Ofc you will recieve gerbers and pdf or bmp picture. Cute 3d model also :p I dont see what to do so cant say how much time is needed.
$6 USD in 10 days
5.0 (51 reviews)
5.9
5.9
User Avatar
over 12+ years of experience in PCB layout design. Expertise in EDA layout tools Pads & Allegro. Over 6 years of experience in Ethernet related layout designs with Electrical interface, Optical interface, PHY device, Switch, Processor, DDR, FPGA, Press-fit Backplane connectors, CPLD. Good knowledge on DFM, DFT and DFA Concepts. Exposure to Product development stages. Knowledge in High speed designs, signal integrity, EMI, EMC concepts. Sound knowledge on Component creation, Design Rule settings, Library management and Customer deliverables with documentation.
$5 USD in 3 days
5.0 (36 reviews)
5.9
5.9
User Avatar
Hello, I would like to be considered for your project. I have done similar work in Eagle. Please have a look at my profile. Hope to hear from you soon. Thanks
$10 USD in 3 days
4.8 (15 reviews)
5.7
5.7
User Avatar
Hi, I am an Electrical Engineer practicing for last 8 years in an R&D Organization. I have designed a number of products ranging from RF & Microwave circuits to digital circuits. i have experience in designing filters, couplers, LNAs, Amplifiers, antennas, sweep generators, function generators, VCOs, NCO and many more in the frequency range of DC to 2 GHz. i use ADS, HFSS, OrCAD, Eagle PCB and Altium for the design and development of the above mentioned products. I have designed circuits for Filters, Couplers, LNA, Amplifiers, Antennas, Bluetooth, WiFi, GSM, GPS, Sweep Generators, Function Generators, VCOs, NCOs, DDS, 555 timers, AM Modulators, Microcontrollers, EEPROM, Flash, Accelerometers, USB, RTC, Strain Guages, Opto-couplers etc. I can layout the required PCB using Eagle. Kindly show me schematics so that i can give you better idea about time. I can commit 15 to 20 hours a week for this project. But if the requirement is urgent, i can allocate more time for this project. Looking forward to discuss in detail. Regards
$8 USD in 15 days
4.8 (27 reviews)
5.8
5.8
User Avatar
A proposal has not yet been provided
$2 USD in 3 days
5.0 (14 reviews)
3.5
3.5
User Avatar
Hello, I am professional prototype engineer with 6 years experience in big automotive company. I have done a lot of projects on Eagle. Currently working on Eagle7.2.0. Looking forward to working with you!
$2 USD in 30 days
5.0 (2 reviews)
1.3
1.3
User Avatar
A proposal has not yet been provided
$5 USD in 8 days
5.0 (1 review)
1.4
1.4
User Avatar
Hi, I am currently working at the Institute of Automation of Complex Power systems, RWTH Aachen University Germany as a Student Assistant. I have gained practical experience of designing two layered PCB's in the last two months on top of my previous experience gained while working on different projects during my Bachelors in Electrical Engineering. I can send you some samples of what I am currently working on if you request. Kindly let me know if you are interested in my services. I would like to use RS Desing spark PCB design software because that is what I am using currently. Thanks. Kind Regards, Waqas
$5 USD in 3 days
4.4 (2 reviews)
1.7
1.7
User Avatar
Hello, I have over 15 years of experience in project development, layout of electronic boards, sending all the necessary documentation for production and assembly design (BOM, Gerber files). In developing the layout I use Altium Designer, an environment recognized in the automotive industry for the development of electronic designs. I'm waiting.
$4 USD in 16 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I am well versed with EAGLE and I like designing PCB's. I'd like to work on your project too because I like to learn new things when I design PCB's and I'm constantly upgrading my skills to improve and enjoy the designing process.
$5 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Bachelors Degree in Electronics and Telecommunication Elind Induction Furnaces pvt. Ltd - Designation: R&D Engineer Electronics Electrical - Department: manufacturing -Designing electronic circuits like DC power supply high power Medium frequency (MF) generators ,Electric converters ,with IGBT and SCR Filters, Resistors networks -Testing of the switchgear panel -Installation and calibration of different industrial sensors -Testing all the electrical and electronic parameters of the Induction Furnace -Analyzing all the test results and making necessary changes to the circuit -Testing and Commissioning of the induction Furnace -PLC and SCADA Interfacing of automatic loading Unloading systems - Reporting to the higher officer - Maintaining quality & assuring satisfaction to end user
$5 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Предложение еще не подано
$4 USD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Here in Tepuy Electronics, we do this kind of work everyday. If your board have approximately 50 components, we need about 2 ~3 hours to design the PCB from the schematic, depending on the type of components and technology involved. We use Eagle in all our original designs, so we can provide you the .brd file.
$13 USD in 15 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, I am new here but I have experince more than 2 years about electronics pcb design and electronic R&D. I hope you offer me I promise you, I will done very well this job in my first change. Thank you
$11 USD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello. My name is Milos Sapic and I am a Electronics engineer with experience in PCB designe, i have experience with Altium designer and OrCAD you can see in my portfolio. Please choose me and you will not regret and you will be satisfied with the speed and quality of work. I look forward to possible cooperation. Best regards Milos.
$16 USD in 15 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of TAIWAN
Seattle, Taiwan
4.3
10
Member since Dec 6, 2009

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.