Find Jobs
Hire Freelancers

Circuit design

$250-750 CAD

Closed
Posted about 3 years ago

$250-750 CAD

Paid on delivery
Hi, I am looking for someone to help me design a circuit for a space heater. The space heater is battery operated and will require to operate with a temperature sensor to automatically heat a small space. I would also like to add a timer clock that you could set for the heater to automatically turn on at certain times. I would like to know: What type of heating element and size fan will you use, to heat about a 30 square foot area? What size battery do you think this system will need? I would like to turn this into a consumer product, so I would need all the parts to buy offshevle I am an industrial engineer by trade and I will design the enclosure myself. Thank you
Project ID: 28946713

About the project

28 proposals
Remote project
Active 3 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
28 freelancers are bidding on average $462 CAD for this job
User Avatar
Best PCB Design Expert at your doorstep! Dear Client, We can help you design a circuit for a space heater as per your requirements. We couldn’t stop ourselves from bidding after going through the description as they are an exact match with our skill set and experience. We have experience in Battery based PCB design and know all the intricacies required to get the job done with perfection. With more than 15 Years of experience in PCB Design and Circuit Design in Altium, We can ensure you best quality work and before time delivery. Following is a brief list of expertise that we are carrying: 1. IOT products development 2. Microcontrollers based circuit design – STM32, STM8S etc 3. Smart Products like Smart watch - GSM/GPRS/GPS etc 4. Wireless Products - BLE/WiFi- ESP32/ESP8266/NRF24L01 5. Low Power Battery Products design – Rechargeable and Non chargeable 6. Power Electronics – Buck, Boost, Flyback etc 7. Temperature sensor, Timer clock, Heating Element Please answer the following questions: 1 What are your future plans with this project? 2. Are there any specific market standards like CISPER you are aiming? 3. What will be ambient temperature of this product? 4. Are there any other specific requirements besides the ones you mentioned Let’s have a quick discussion for 5 mins where we would formulate a plan of action of how we shall take this project to the horizons of success. Regards Avi Tech Experts Quality is never an Accident
$600 CAD in 2 days
5.0 (60 reviews)
7.8
7.8
User Avatar
Hello, thank you for your job posting. I read your description about--CIRCUIT DESIGN I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, PLC and so on. And I can design the circuit by the Altium, Eagle, KiCAD, Allegro & OrCAD, PADs. I provide the services - Gerber files, Netlist generation, BOM generation and 3D Models of PCAD and ECAD. I am also good at AutoCAD, Solidworks. And I can simulate all circuits with Proteus, LT-spice, Matlab, Simulink, Multisim, and Labview as well. Due to my experience in firmware development, I will bring you the perfect result in time with high quality. I will also give you a detailed explanation of the process. Looking forward to hearing from you soon Thanks
$250 CAD in 2 days
5.0 (211 reviews)
7.3
7.3
User Avatar
Hello sir, I have experience in designing electronics circuits and can develop hardware compatible smartphone and PC based apps. I also have done a lot of IoT projects and can transform your idea into a fully working product. I HAVE ALL THE HARDWARE AVAILABLE TO TEST AND DEBUG THE CODES. If you wish we can discuss details in chat. Thanks
$600 CAD in 20 days
4.8 (74 reviews)
7.2
7.2
User Avatar
Hello, I am an electrical engineer. I am well adept in heat exchange devices and feedback system to control temperature automatically. I am also experience in Arduino that seems specially useful for this project. I can start immediately and deliver you with quality work. Thanks. Waiting to hear more.
$400 CAD in 7 days
5.0 (68 reviews)
5.5
5.5
User Avatar
Hi! I am an Electronic engineer, PCB Layout, Circuit Design, microcontroller, STM32 microcontroller, C programming expert having past experiences with ,Altium, arduino, pic, AVR, chipkit and Texas instruments microcontrollers I can do this job with 100% satisfaction. Reach me through the chatbox. I am waiting for you over the chat. Thank you!
$750 CAD in 7 days
5.0 (22 reviews)
5.6
5.6
User Avatar
Hello there. I hope to work with you because your project is very familiar for my past works. I have 3+ years experiences in Electrical Engineering & PCB Layout & Circuit Design. Hope further discussion about your project more specific. Regards.
$250 CAD in 5 days
4.5 (38 reviews)
6.0
6.0
User Avatar
Dear Client, I will design circuit for a space heater and included reliable, robust and quality products. I have read and understood your requirements and could do it for you in the least time and utmost superior quality. I have experience in Circuit design and could design it for you as per your requirements. I am having more than 15 years of experience in PCB Design, Circuit Design, Circuit simulation, IOT products development and building electronic products. The expertise of mine is in the following fields: 1. Wireless Products – BLE, Wifi, NFC, LoRa etc 2. Power Electronics- Buck, Boost, Flyback, Half Bridge etc 3. IOT sensors interfacing – Pressure, Temperature, Moisture, PH etc. 4. Microcontrollers- ESP32, STM32, STM8S, RL78 etc. 5. Sensor, Heater, Battery, Clock After reading your project details, I have certain queries and suggestions: 1. What is the application of this product? 2. What will be ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? 4. What are the standards that the product would be complying to? 5. What are the user protections required for this project? Please try to answer these questions based on which I would be providing free of cost consultation. I am new to this site but I am an expert in electronics product development. Please message me so that I can formulate a success plan for this project. Waiting for your reply, Regards Hari Mohan Engineering for one is a magic for others
$500 CAD in 2 days
4.4 (8 reviews)
6.2
6.2
User Avatar
Hello I have more than 15 years of experience in the embedded systems design and pcb design and electronics systems design So let's discuss your project in chat
$620 CAD in 7 days
5.0 (20 reviews)
5.0
5.0
User Avatar
A super easy task to be done,,,As i will apply here the PID control for high accuracy rather than normal P or PI control,,,,Thanx for posting the job..........
$250 CAD in 3 days
4.8 (86 reviews)
5.0
5.0
User Avatar
Hi, I am an electronics and communication engineer with more than 2 years of experience in circuit and pcb designing. I have worked on many projects in past. So I think I can help you. let's discuss more over chat. Please look at my profile once.
$250 CAD in 1 day
5.0 (39 reviews)
4.8
4.8
User Avatar
Hello, I've complete MS Electric Engineering (Control System). I have plenty of experience in firmware development and micro-controller developments. My Core Skills are: -MATLAB, SIMULINK MODLING AND SIMULATION. -ARM, DSP, MCUs, Arduino, Raspberry pi experiences. -Ardunio, Circut Design by the Altium, Eagle, PADs, 3D Models -Multi-Layer PCB design. -VHDL/Verilog HDL and FPGA. ✅ Plagiarism-Free ✅ No, time Waste ✅ Standardized Content Deliverable ✅ NO Advance Payment Looking forward to your response, Best Regards: Aqeel Ahmed
$500 CAD in 5 days
4.8 (15 reviews)
4.7
4.7
User Avatar
Hi, there. I am Peter, I am very skilled and experienced in circuit design and simulation, infact I already have a design ready which can be used for heaters, these designs and readily backed up by simulations on LTSpice as I make it so that you can verify, I do this all the time. I could also design a board if you want on Easy EDA and get it shipped to you, I really want to work on your project as it excites me. I can't wait to hear from you! Thank you Peter
$500 CAD in 7 days
4.8 (10 reviews)
4.8
4.8
User Avatar
Hello, Hope this message finds you well, I checked your details and I believe that my experience is what you are looking 4. I have been working on similar projects for the past eight years, and I have the essential skills including; Engineering Electronics Electrical Engineering PCB Layout Product Design Circuit Design I will prove to be of great help to you. SEND MESSAGE/CHAT, so that discuss more on the details including budget and deadlines… Please REMEMBER to; Wash your hands frequently, Maintain social distancing, Avoid touching eyes, nose and mouth..., Practice respiratory hygiene, Stay home and if you feel unwell seek medical care early. Regards, BrainCenter Inc
$250 CAD in 7 days
4.3 (13 reviews)
4.5
4.5
User Avatar
Hi there, We can help you in designing a circuit for a space heater. The space heater will be battery operated and will be operate with a temperature sensor to automatically heat a small space. We will surely add a timer clock that we will set for the heater to automatically turn on at certain times. Our technical person will answer to your all queries. Kindly spare 10 minutes for the interview. Regards, Harjit Singh
$280 CAD in 7 days
4.9 (3 reviews)
3.9
3.9
User Avatar
Hello friend, I'm 10 years industry experienced professional in electronics/embedded design and manufacturing industry. So, I'm confident I can deliver you a successful solution space heater Circuit design project. If I mention my professional background little bit, I'm experienced professional (B.sc-applied science/M.Sc-applied electronics) in electronics, embedded micros and PC software programming. In electronics, used Altium, PSpice, Eagle,Easy EDA, Ki CAD and Proteus design software for circuit simulation and Multi-layer PCB designs, and implementing communications protocols like USB, serial, etc. In Embedded domain, did several projects using Arduino, PIC and AVR ,STM8, STM32, cypress PSOC micros in C/C++. And also exposed to VHDL for Altera and Xilinx FPGAs too. Thanks and Regards, Niroshan R
$500 CAD in 7 days
5.0 (4 reviews)
3.3
3.3
User Avatar
Hi, Being an Electrical Engineer and an Assistant Professor, I have supervised various projects and can find suitable designing criteria for the heater. Hope to discuss further details soon.
$300 CAD in 5 days
4.7 (2 reviews)
3.3
3.3
User Avatar
Hello Dear, Engineer I'm electronic engineer, I have worked developing electronic products. I have experience designing, manufacturing and assembling electronic boards. I would like to know about project deadline, product details, and so on. Contact me to talk about the features of this project and look if is possible work together. Maybe we can merge ideas in other projects or something. I hope your reply, Regards!
$500 CAD in 7 days
5.0 (1 review)
1.0
1.0
User Avatar
i am expert in analog and digital circuit and PCB design with more than 20 years experience. pls give me chance to design your project to answer your question i need know characteristic of your area and what power will need to heat it
$750 CAD in 7 days
0.0 (0 reviews)
1.0
1.0
User Avatar
Your first question is not within the scope of the relative field in which this project bid is being posted. Because, the choice of heater element, size and the type of fan for a 30sqft. area ... is not very straight forward or simple solution for an electronics engineer. First of all it includes the factor (your area temperature situation throughout the year, as it is going to be a consumer product + many other major factors). Your second question is bound to the complete answer of first question. And the Third question, As you are an engineer yourself kindly take notice that this system might not be compared with the defination of a "consumer product" instead it would always be like a "project" if you are considering a system for a big area 30sqft. e.g. Because in your bid you are asking to bid for a system and many electronics designer would drag you to only a "controller circuit for your desired system". Therefore please simplify or clarify your demand w.r.t a "system(which involves electronics and mechanical both) or a consumer product "temperature controller, timer etc.(which involves good electronics only, which I am good at)". Though I might provide you a reasonable mechanical solution too. thanks
$750 CAD in 20 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have experience as a heating/cooling technician before I started to do electrical design. Some constraints would need to be addressed before a permanent solution can be discussed. What is the application? What is the height of the heated space (for total air volume)? What will the temperature difference be between the temp inside the heated space and outside? How large can this be? How long does the battery need to last? What intervals of the time clock would be preferred? What is the budget for the finished product? Thank you, I hope your design process goes well. Robert Bell
$500 CAD in 7 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of CANADA
Concord, Canada
4.9
10
Payment method verified
Member since Jul 8, 2016

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.