Reverse engineering in mechanical design jobs

...experienced mechanical engineer to design an enclosure for my electronics. The primary purpose of this enclosure is to provide protection for the electronics within it, as well as to ensure that it's aesthetically pleasing and optimally utilizes space. Additionally, the enclosure should have a certain level of IP rating, so a previous experience with IP-rated designs will be a plus. Key tasks will include: - Creating a medium-sized enclosure that fits the specified electronic components. - Employing the use of plastic as the preferred material for the enclosure to ensure durability and cost-effectiveness. - Ensuring the design fulfills the aesthetic requirements. - Meeting the desired IP rating for electronics protection. The ideal candidate will possess a s...

I'm in need of a Tennessee-based civil engineer to verify and stamp a set of site plans for a residential development. The project is urgent, requiring completion within 1 week. The work is primarily focused on checking and certifying the existing plans, rather than creating new ones. Key requirements: - Civil engineering experience: The ideal candidate should be a qualified civil engineer with prior experience in residential development projects. - Tennessee certification: A thorough understanding of Tennessee's building regulations and experience with site plan stamping in the state is essential. - Attention to detail: The site plans need to be carefully reviewed and verified for accuracy and compliance with local regulations. The existing site pla...

I'm in need of an experienced mechanical engineer with expertise in Finite Element Analysis (FEA) to perform structural analysis on frames and plates made of metals. This is specifically on 3D Models of Material Handling Attachments such as pallet forks and lifting jibs etc. Lifting Attachments must be engineered and approved before proceeding into manufacturing. Key requirements and tasks: - Conducting in-depth structural analysis on metal frames and plates to ensure durability and safety in my design. - Using FEA software to simulate stress distribution, deformation, and other relevant factors. - Providing detailed reports on the analysis results, including insights and recommendations for potential design improvements. Ideal skill...

My project involves the planning and design of trusses for a roof with a 132 psf rating. The rooftop must have a shed style design. I need a engineer stamp. - The maximum span of the trusses is less than 20 feet. - The trusses should primarily be constructed from wood. Ideal project candidates need extensive experience in truss design and engineering, a familiarity with a variety of materials, but specifically with wood, and a solid understanding of shed style roofing. Previous experience in designing structures to withstand specific weight ratings, like my project's 132 psf, is of great value too. The project should be completed within efficient timelines without compromising on the quality.

I'm in need of a skilled engineer specialized in load structural calculations and wind assessment. The project involves a rural single-family home in the US. Key Responsibilities: - Conducting load structural calculations for a single-family home in a rural area - Carrying out a comprehensive wind analysis specific to the location of the project Ideal Candidate: - Professional engineer with expertise in structural engineering - Proficient in performing load calculations for residential structures - Capable of conducting wind assessments for rural settings - Previous experience with similar residential projects in the US is a plus Your work will be crucial for ensuring the safety, stability, and resilience of the single-family...

I need an experienced Solidworks professional to help me design a complex mechanical product. Key Requirements: - The primary task is to model a product with detailed mechanisms and moving parts, so I need someone who is proficient in 3D modeling and assembly design. - The product is at a prototype stage, so you need to have a good understanding of product design and the ability to bring innovative ideas to the table. Please provide examples of similar work you have done in the past. This project is time-sensitive, so please only apply if you can commit to meeting the deadlines. the pictures are for reference only I want to design a machine that works similarly the the one at but it must not be the same machine, it needs to be of simil...

I'm in need of an expert in Siemens Nx for a 3D modeling project, aiming to prototype a mechanical component. The role will require: - Expertise in 3D modeling, specifically within Siemens Nx. - i need to make only one part to make a 3d circular pattern to make 6 paterns my software has some limitations i think Only candidates with proven experience in these areas will be considered. Your portfolio showcasing similar projects will be advantageous in the selection process.

Dear freelancer, As someone who is relatively new to Revit, I am looking for an experienced tutor who can guide me through the complexities of the...As someone who is relatively new to Revit, I am looking for an experienced tutor who can guide me through the complexities of the program so I can master its use for structural engineering. The Focus: * Particularly, I'm interested in using Revit to designing formwork. Ideal Candidate: * An expert in Revit with a strong background in Structural Engineering. * Previous teaching or tutoring experience would be a plus. Look forward to developing my skills and confidence in using Revit as a critical tool for formwork design. Please include your preferred mode of tutoring and the schedule...

The goal of this project is to create a 2D/3D logo in /light/gray color. It should also include the colors of the German flag. The sketch must be ORIGINAL! I'm tired of Google images. The logo must be in high resolution, for example, 2560x2560 pixels. It should be submitted as a Photoshop PSD file. and also make it in the size as on the website Product topic: electrical engineering products for smart home our website: Color scheme of the future website example: An example of a logo I like: Most products are from Germany; the logo should reflect the colors of the German flag.

I require a skilled electrical engineer who is experienced in PLC programming to develop new PLC programs for my project. Key Requirements: - Proficient in electrical engineering concepts - Experienced in PLC programming - Capable of developing new PLC programs The successful candidate will be able to translate my requirements into effective PLC programs that can be implemented for the project. Your expertise in electrical engineering, combined with your knowledge of PLC programming, will be crucial to the success of this project.

...be used in the patent application process. Responsibilities: • Collaborate with me to understand the design and functional requirements of the invention. • Create detailed 3D models using IronCAD. • Produce accurate technical drawings and schematics in AutoCAD. • Ensure all designs meet the standards required for patent applications. • Make necessary revisions based on feedback. Requirements: • Proven experience in IronCAD and AutoCAD. • Strong portfolio showcasing previous design projects, particularly those that have gone through the patent process. • Knowledge of engineering principles and manufacturing processes. • Ability to work independently and meet deadlines. • Excellent commun...

I'm seeking a skilled logo designer to create a compelling wordmark logo for my engineering business. This logo should reflect professionalism and incorporate a sleek, modern aesthetic tailored for the engineering sector. Key Project Requirements: - Preferred color is blue - Design should convey professionalism. Ideal Skills and Experience: - Some logos that I have been impressed with are 3-d logos with my initial GE and incorporating name into a truss. Proven experience designing wordmark logos, specifically in the engineering or related industries. - Ability to incorporate brand identity into design. - Proficient in modern design software with a portfolio showcasing relevant work.

I'm seeking a skilled and experienced content writer to handle our social media and direct email content needs. The ideal candidate will have a strong understanding of the environmental services and engineering industry. Key Responsibilities: - Creating daily LinkedIn posts with a focus on lead generation. - Crafting twice-weekly direct email posts. Content Focus: - The content should primarily focus on topics such as Natural Resources, Permitting, Environmental Due Diligence, and Remediation. Ideal Skills and Experience: - Proven track record of creating engaging and effective social media and email content. - Comprehensive knowledge of the environmental industry. - Experience with LinkedIn content creation and lead generation. - Excellent writing and communication skills. ...

I'm looking for a skilled translator to convert a German textbook on Fourier Analysis to English. It's vital that the document is translated with an intermediate understanding of mathematical terms. The final document should be in LaTeX. Requirements: - Translation: I need the remaining 332 pages of the textbook to be translated accurately and diligently. - LaTeX Editing: The translated document must be professionally formatted using LaTeX. Ideal Freelancer: - Fluent in both German and English. - Proficient in mathematical terminology. - Familiar with engineering applications of Fourier Analysis. - Experience with LaTeX. Please provide a quote for the project and its costs. I will share further details upon contact. Thank you.

I'm in need of a skilled Laravel programmer with a solid experience in web application development. Key Requirements: - Proficiency in Laravel: You should be adept at using Laravel framework to build web applications. - Strong Understanding of Web Development: A background in web development is essential, as we're focusing on a web-based project. - Effective Communication: You will need to be able to communicate effectively to ensure that the project is developed in accordance with the requirements and within the timeline. The project will entail: - Building a web application using Laravel framework - Implementing functionalities and features as required - Ensuring the application is responsive and optimized for performance Ideal Candidate:...

I'm in really need of a skilled, software engineer who enjoys a fun challenge to develop and build a new software. The software will perform brute-force calculations to uncover various physics and maths field equations, as well as graphical rendering. The interactions of all the objects will also be rendered. **Key Requirements** - Discover a Range of Physics Field Equations: Your main task will be to set up the software to uncover equations from classical mechanics, electromagnetism and quantum mechanics. However, it should also be able to work with just mathematical equations. - Graphical Rendering: The software should not just give results in text form, but should also be able to visually represent the outcome. We are looking to have a clear and sharp display...

I'm looking for structural engineering professionals to design exterior ceilings and soffits for a 12-story St. Regis Resort. They must be experienced in creating designs that meet Miami Dade hurricane codes. Key Requirements: - Waterproof - Fire-resistant - Aesthetically pleasing - Designs need to incorporate steel and light gauge metal framing components I've already secured permits and approvals necessary for this project. The design must strictly meet all local authority guidelines. Prior experience in this area is strongly preferred.

We are searching for an experienced tire designer who can follow our directions to produce initial flat CAD drawings of tread and sidewall designs followed by final 3D modeling. We need to create new designs in all consumer categories, light truck, 4x4 Off-Road vehicles, PCR and ATV/UTV. The final mold drawings and engineering will be done by the factory. Ideal Freelancer: - Proven experience in tire design - Understanding of the factors that contribute to tire performance and durability - Proficiency in CAD software for tire design - Please provide your portfolio

I'm in search of an able freelancer to assist in developing an engaging course on engineering. You'll be using Final Cut Pro or any other good substitute for video editing and document creation. Primary tasks: - Moderate-level video editing with textual overlays and basic animations. - Typing, copying, pasting, and incorporation of relevant images and videos in the course materials. - Each video for the course will be less than 30 minutes in duration. Ideal skills and experience: - Should be proficient in using Final Cut Pro or other relevant app. - Experience in video editing and document creation. - Has an understanding of digital content creation for educational purposes. - Exemplary attention to detail. This project is an e...

I'm seeking ... Your role will involve leveraging your proficiency in MATLAB to optimize a mechanical system. The main goal of this project is to achieve the best possible performance of the mechanical system through your advanced MATLAB skills. Key responsibilities that the ideal candidate will handle include: - Utilize MATLAB to optimize a complex mechanical system - Implement advanced algorithms for system enhancement - Ensure the system is running optimally through your expertise The ideal freelancer for this role should have a strong background in: - Mechanical Engineering - MATLAB - Optimization techniques - Prior experience in similar projects would be a huge plus If you're confident in your MATLAB skills...

I'm looking for a skilled writer who has a background in engineering management, specifically in the area of sustainability and circular economy. Your task will be to write the methodology section for my research project. Key Tasks: - Adapt the methodology to a technical audience - Ensure the methodology aligns with principles of circular economy and sustainability - Provide a clear, concise and well-structured methodology section I need someone who is not only well-versed in engineering management but also has experience in writing technical and research-based content. A familiarity with sustainability and circular economy principles would be a great advantage.

...people interact with technology. Project Scope: We are currently in the pre-manufacturing stage and require a team with expertise in the following areas: Product Concept Design: Translate our vision into a tangible design that embodies the essence of our innovative concept. Product Detailing/Functional Design: Create a detailed design that encompasses all electrical and mechanical components, ensuring functionality and manufacturability. Professional Product Renderings: Develop high-quality renderings that showcase the device's aesthetic appeal and key features. Prototyping and Product Testing: Build and test prototypes to validate the design, functionality, and user experience. Assistance in Manufacturing of Product...

...Reunion/Networking event on various social media platforms. The videos should be less than 1 minute in length, three different videos. You can use any music that you see fit but you need to have a good eye for visuals and a knack for storytelling. Key Responsibilities: - Creating engaging, 3 short videos for Facebook, TikTok, and YouTube - Ensuring the videos are less than 1 minute in length - Using royalty-free music effectively - Showcasing strong editing and storytelling skills -The videos must relay these key information 1. Name of the event is 'Poly Networking Event' 2. The event will be held on July 20, 2024. 3. The event will host guest speakers from IT & Engineering professionals from fortune 500 companies suc...

I'm seeking a skilled sound equipment engineer for my live performances. Having an in-depth understanding and practical experience with microphones, speakers, and mixers is crucial. The core tasks include: - Enhancing the sound quality: The clarity of the performance is paramount, so this will be a key task. - Troubleshooting: Quick fixes and problem-solving skills are needed for any unforeseen sound issues during performances. Prior experience with live performance sound engineering is a massive plus.

We are looking for a good mobile developer with the following skills: - 2D visualization using chat with zoom, selection, panning. - 3D visualization using , unity.

...existing plans for an interior home remodel to submit to the City of Henderson, NV for an owner/builder permit. MUST be able to STAMP the plans and be licensed in NEVADA, USA. The city wants drawings from an engineer mainly for the following: (complete plans to be discussed if you are interested in this assignment) -replacement of two windows to two larger windows with new header to carry load of second floor above -replacement of a double front door with glass block sidelights to a single pivot door with larger glass sidelights with new header to carry load of second floor above. Window and door manufacturer to supply engineering specs to engineer -removal of upstairs fireplace and replace with wall and new opening to primary bath (non-load bearing) -re-framing ...

I'm in need of an experienced individual who can work on mechanical design, specifically industrial design, for tools and equipment. Key requirements: - Proficiency in mechanical/industrial design, especially for tools and equipment - Strong understanding of design principles - Capable of translating ideas into functional and aesthetic designs Ideal skills and experience include: - Background in industrial design - Experience with tool and equipment design - Proficiency in relevant design software Attached is the brief document.

...simulation model in MATLAB Simulink. The aim of this model is to study the performance of a Reverse Osmosis (RO) system. The specific requirements of the project are as follows: - **Focus on Energy Optimization**: The primary goal of the simulation is to optimize the energy consumption of the RO system. This includes analyzing its current energy usage, identifying potential areas for improvement, and implementing these changes in the simulation. - **Desalination Application**: The simulation will focus on the application of the RO system in desalination. While the primary focus is on energy optimization, understanding its overall performance in this context is also important. Ideal candidates for this project should have a strong background in...

I'm in search of an experienced CISSP certified instructor with an advanced level of knowledge. The ideal candidate should be able to deliver these classes in an in-person format. Key Training Areas: - Security and Risk Management - Asset Security - Security Architecture and Engineering I need someone who can provide thorough explanations and practical examples of these topics. Your role will be to break down complex concepts into understandable parts for the students. This means ensuring the content is clear, concise, and engaging. Ideal Skills and Experience: - Advanced CISSP certification - Experience in in-person training - Strong communication and presentation skills - Ability to simplify complex ideas - Understanding of adult learnin...

I'm looking for a proficient mechanical engineer to design a geothermal snow and ice melt system in my driveway. There is no existing heating system to integrate it with. The driveway is quite extensive, at a little over 3300 square feet. Ideal skills and experience for the job: - Understanding of depths and number of wells needed for the system. - The heat exchange system and heat pump required to handle this square footage - Prior experience setting up geothermal systems - Knowledge or experience in dealing with large-scale driveway installations - Ability to work without integrating existing heating systems.

We are an engineering company in need of a P&ID drawing for our margarine plant process. This project requires the completion of 1 P&ID done in AutoCAD. Files must be delivered in DWG and PDF (monochrome) format and adhere to best drafting practices for P&IDs. Please do not bid if you lack direct experience with P&ID drawings for industrial processes. We will provide the PFD. Additionally, the process must be simulated using HYSYS, with the simulation results included as part of the project output. The project must be completed in 5 days. Project Details: - Create a standard P&ID from the provided PFD. - Simulate the process using HYSYS and include the simulation results. - Use of layers is required and should be consistent throughout...

...engineer specialized in residential building projects, specifically multi-story structures, for my new project in Lisbon, Portugal. Key Specifications: - The purpose of the building is residential use only. - The structure should have more than three stories. - A mezzanine as one of the amenities to incorporate in the building is required. Essential Skills: - Experience in residential high-rise building design. - Familiarity with engineering projects in Lisbon and local building regulations. - Experience in incorporating mezzanines into residential building designs. Your proposal should outline your experience with similar projects, your understanding of Lisbon's building laws, and your design approach when inc...

I need a professional sound engineer to perform three main tasks on an audio file that exceeds 5 minutes in length. The original audio file is in MP4 format. The tasks include: - Removing background noise and interference, - Fixing audio distortion, - Enhancing the overall clarity of the audio. Ideally, the person for this job has experience in audio editing, sound engineering, and professional software for audio clean-up. Previous work with MP4 audio files will be preferred. This task requires precise and careful attention to audio details.

Hi, I need a structural engineer to design a steel i beam for a 20' 3" span (wall between kitchen and living room is being eliminated) and a second Steel I beam for a 23 foot span beam in the center of the family room.. I want the I beam to be completely hidden in the floor joist which are either 2x8 or 2x10 floor joist. These beams are for a cape cod style house the address is 56 Hale Rd Glastonbury CT 06033. Above the Family room there is a flat roof, above the kitchen and living room there is living space and a roof . Please let me know if you need anymore information.

I need a talented professional to develop a basic conceptual design for mechanical manufacturing. The project goals include: - Creating a CAD design suitable for mechanical purposes (for 3D printing) - Tailoring the design specifically for manufacturing purposes The ideal candidate will have: - Extensive experience with CAD software - Background in mechanical design - A solid understanding of manufacturing principles Ultimately, the design doesn't need to be heavily detailed, a basic conceptual design will fulfill my needs. I'm looking forward to seeing your vision for this project come to life!

I require a comprehensive set of engineering plans for a commercial project. This includes electrical, mechanical, and plumbing plans. Additionally, I need the following: - Detailed Floor Plan: showcasing the layout and features of the space - Site Plan: illustrating the structure's placement on the property - Energy Code Plan: ensuring compliance with energy regulations - 3D Interior Design: providing a visual representation of the interior space - 3D rendering (1, 60-80 ft wall design, 1, 20 ft wall design) The ideal freelancer must have prior experience developing commercial engineering plans and 3D interior designs. Proficiency in relevant software for engineering and design is a must. Strong communication skills ar...

I'm looking for a skilled engineer who can design a self-supported steel chimney for a metal manufacturing plant. This chimney will be integral to industrial emissions control. Tasks Include: - Tailoring the design to accommodate the specific needs of a metal-manufacturing environment. - Incorporating robust safety features and compliances for high-temperature metal emissions. Ideal skills: - Structural Engineering - Industrial Design - Knowledge of industrial emissions standards - Experience with metal manufacturing processes.

I am in need of a skilled professional who can help me create schematic diagrams for educational purposes. The work will involve: - **Creating Schematic Diagrams**: I need help with creating Schematic Diagrams for educational purposes that would give a basic overview of the system with major components. - **Detailing**: The level of detail required is to provide an overview and include major components. Detailed component specifications and values are not necessary. Ideal candidate for this project: - **Electrical Engineering Background**: You should have a strong background in electrical engineering to accurately depict the systems and components in the schematic diagrams. - **Experience in Creating Schematic Diagrams**: Prior experience in...

I'm in need of an experienced BIM 3D modeler, proficient in Revit software to assist with my project in India. The model will require comprehensive detailing including MEP elements (Mechanical, Electrical, Plumbing). Key Responsibilities: - Develop a detailed BIM model with a focus on MEP elements - Ensure the model is suitable for visualization and presentation purposes - Collaborate with me to ensure the model meets the required standards Ideal Skills: - Proficiency in Revit - Extensive experience with detailed BIM modeling, particularly in an MEP context - Strong communication and collaborative skills (Tamil) The project is primarily aimed at visualization and presentation, so you'll need to ensure your work is both technically acc...

...civil engineering firm, Anglin Civil. The logo should primarily incorporate the company initials. Key Requirements: - Vintage style: I'm looking for a classic, timeless logo design that reflects the company's heritage in civil engineering. If you have something more model and simple I am okay to looking at that as well. - Colors: The logo should predominantly feature red, white, black, and grey. - Company initials: The logo should creatively integrate the initials of our company, 'Anglin Civil'. Ideal Skills and Experience: - Proven experience in creating vintage-style logos. - Strong understanding of color theory to effectively blend red, white, black, and grey in the design. - Proficiency in incorporating co...

I am in need of a computer engineer who can assist me in developing a WhatsApp embedded onboard system. This system should be capable of sending, receiving, and managing messages. Key Requirements: - Implementation of WhatsApp integration for an onboard system. - Functions to send, receive, and manage messages through the onboard system. Preferred Skills: - Proficiency in C#. - Familiarity with Visual Studio MVC projects. - Experience in embedded systems and software development. - Familiarity with messaging application development. - Strong problem-solving abilities for hardware-related issues. Should you have a background in both computer engineering and software development, with a particular proficiency in C#, I'd like to hear fr...

...an in-depth analysis on the heat transfer and airflow rates of a vehicle brake disk. The primary goal of this project is to evaluate the performance of two different materials - cast iron and carbon ceramic - under varying conditions. Key responsibilities include: - Analyzing the heat transfer rate of the brake disk made from both cast iron and carbon ceramic. - Investigating the airflow rate on the brake disk for these materials. - Comparing and presenting the results of the analysis, particularly focusing on the performance differences between the two materials. - Providing insights and recommendations on the preferred material based on the analysis conducted. Ideal skills and experience for this project include: - Proficiency in COMSOL MULTIPHYSICS software. - Strong...

Seeking a professional with expertise in Ansys electronic software, capable of conducting a detailed electromagnetic simulation. The project is centered on electromagnetic dampers, requiring an in-depth simulation and analysis to assess and refine our designs. - Handle electromechanic simulations - Evaluate and improve current dampers design You need to have prior experience with electromagnetic simulations, particularly within the scope of dampers. Knowledge in engineering projects involving similar systems will be highly beneficial.

...needs an expert who is experienced with either Haraka or Postal. The project requires understanding, building and managing SMTP infrastructure on a deep technical/engineering level. To simplify the project it revolves around receiving email, modifying some of the headers and then sending it on for delivery. We expect there to be some development involved to achieve the final desired outcome. The full details will be explained in further discussions. We will need the installation and testing of the solution and ongoing support and consulting after implementation. Please note, we are specifically looking for a technical expert in handling Haraka/Postal/SMTP. This is NOT a project focused on email delivery as it is applied to marketing type emails and reputation man...

I'm in need of an OpenRail Designer expert to assist me with a personal project. The part of the project that requires your attention involves the creation of Cross-Sections & Track Components. I will provide you with the design file that I have been working on. Also, I need you to include explanation in the report. Key Responsibilities: - Develop detailed Cross-Sections & Track Components. - Implement engineering considerations where needed. - Ensure seamless integration with existing elements of the design file I'll provide. This is a personal project, so I am particularly focused on quality and a timely delivery. Your expertise in OpenRail Designer is essential to the successful completion of this project. I need the project...

...project initiator, I am currently in need of a competent designer who has substantial experience with SolidWorks. The goal of the project is to develop a highly complex 3D model, inclusive of intricate mechanical motion studies. Key Aspects of the Project: - 3D modeling: The designer's primary responsibility is to create a 3D model. This will not be a basic rendering, but a complex structural design featuring intricate mechanical motion studies. - Detail Oriented: The project necessitates a high degree of granularity. You will be expected to engage extensively with components and their specifics. - Manufacturing Process: The 3D model must be prepared with the manufacturing process in mind. It will be utilized directly in the production li...

I need a civil engineering professional who has experience with OpenRail Designer Software. The task involves a Workplace Practical Task which has not yet commenced. Key Details: - The task must be completed within 24 hours upon you receiving it. - Specific requirements for the task will be delivered along with the task itself. Ideal Candidate: - Proficient in civil engineering, particularly with expertise in rail alignments. - Familiarity with OpenRail Designer Software. - Ability to work efficiently and effectively within tight time constraints. - Proffiosional and academic writing abilities Please let me know your availability and relevant experience. The task will consider a real-life example of railway engineering design and you will b...

I am looking for a Docker engineer for a project on a Windows operating system...focusing on running a web application and would like to implement a continuous integration/continuous delivery (CI/CD) pipeline in our operations. Key responsibilities would ideally include: • Building Docker solutions for our Windows-based web application • Setting up an effective CI/CD pipeline Skills and Experience: • Proven experience in Docker engineering • Strong grasp on Windows-based systems and web applications • Knowledge in setting up CI/CD pipelines • Proficient understanding of containerization technologies I anticipate the potential for ongoing work if this project is successful. Please attach examples of similar Docker projects you h...

I'm seeking an experienced ethical hacker with an acute focus on specific target areas. The ideal candidate should have proficiency in: - Network penetration testing - Web application security testing - Social engineering testing Although not clearly defined at this point, there will definitely be specific targets for the ethical hacking focus. Such targets will be further clarified upon commencement of project. Your versatility and adaptability would be essential for this role.

I need assistance to forge a new design for a specific product in the SPM category. Your task, if selected, would involve the conception of a superior product layout with clear focus on innovation and usability. Key areas of discussion would be: * Layout Design: Designing a unique and easy-to-use layout. * Specifications: Discussing and implementing the specific requirements based on user needs. Ideal skills and experience: * Experience in mechanical product design, with a particular focus on Specific Product Manufacturing (SPM). * Innovative thinker with a knack for deciphering product usability needs and implementing the same in design. * Previous working experience in SPM design will be an added advantage.