ADAPTIVE MODULATION AND CODING USING MATLAB PROGRAMMING LANGUAGE
$30-250 USD
Closed
Posted over 6 years ago
$30-250 USD
Paid on delivery
ADAPTIVE MODULATION AND CODING
REQUIREMENTS:
*Bandwidth =20 MHz;
*Number of FFT NFFT=64;
*Number of Data subcarrier Nd = 48;
*Number of pilot Np =4;
*Guard Interval = ¼ of symbol period Ts;
*OFDM transmission: 52 (i.e Nd+Np)
*Pilot data interval = 13 sub-carriers, starting from the 6th;
*Indices of the pilot sub-carier = 6th, 19th, 32nd and 45th sub-carrier;
* All mandatory and optional data rates: 6, 9, 12, 18, 24, 36, 48, and 54 Mb/s
Modulation:
* BPSK, QPSK, 16-QAM, 64-QAM modulations
* Forward error correction coding (convolutional; code rates 1/2, 2/3, 3/4)
Note the following:
{ BPSK ½ code rate = 6Mbps}
{BPSK 2/3 code rate = 9 Mbps}
{QPSK ½ code rate = 12 Mbps}
{QPSK 2/3 code rate = 18 Mbps}
{16-QAM ½ code rate = 24 Mbps}
{16-QAM 2/3 code rate = 36 Mbps}
{64QAM 2/3 code rate = 48 Mbps}
{64QAM ¾ code rate = 54 Mbps}
* OFDM transmission: 52 subcarriers, 4 pilots, 64-pt FFTs, circular prefix
* Data interleaving
* PLCP preamble (modeled as 2x2 long training sequences)
* Receiver equalization
* Viterbi decoding
* Data rates selectable on-the-fly
* Adaptive modulation demo over dispersive multipath fading channel (Rayleigh channel)
*Fading mode = flat fading
*Max Doppler shift = 10 KHz;
*Channel*
This component simulates the effects of over-the-air transmission. It degrades the transmitted signal with both phase and frequency offset, a delay to mimic channel delay between transmitter and receiver, and AWGN.
The noise level of the AWGN is given in dB.
Channel effect with carrier offset with maximum Doppler shift of 10KHz, timing offset, and additive white Gaussian noise (AWGN).
*The Receiver:
Implement a series of components at the receiver, including timing recovery, carrier frequency recovery, channel equalization, and demodulation.
*Calculate the system frame error rate (FER) and bit error rate (BER) based on the original payload message in each frame and the bit output from the OFDM Receiver
Max SNR = 30 dB;
Timing Related Parameters
Parameter Value
Total subcarriers NST 52
Data subcarriers NSD 48
Pilot subcarriers NSP 4 (subcarriers -21, 7, 7, 21)
Subcarrier Frequency Spacing FSP 312.5 KHz (20MHz/64)
Symbol Interval Time TSYM 4 us (TGI +TFFT)
Data Interval Time TDATA 3.2 us (1/FSP)
Guard Interval (GI) Time TGI 0.8 us (TFFT/4)
IFFT/FFT Period TFFT
3.2 us (1/FSP)
SIGNAL Symbol TIme TSIGNAL 4 us (TGI +TFFT
Preamble TPREAMBLE 16 us (TSHORT +TLONG)
Short Training Sequence TSHORT 8 us (10xTFFT/4)
Long Training Sequence TLONG 8 us (TGI2 + 2xTFFT)
Training symbol GI TGI2 1.6 us (TFFT/2)
FFT sample size 64 point
(1) Develop the project as described above using Object oriented Programming in MATLAB
(2) Develop a simulink model to simulate the project as described above.
(3). Develop a graphical user interface (GUI) of the adaptive modulation and coding system where a user can vary the modulation and or coding parameters and the result is displayed in a BER vs SNR graph to show the effects of the varied parameter(s)
**TRY TO COMMENT THE CODE VERY WELL FOR EASY UNDERSTANDING. Thank you.
Hello, I am an experienced freelancer with PhD degree, and many years of industrial work experience.
Please see my reviews for more information.
Relevant Skills and Experience
MATLAB, C, C++, Algorithm, Python, Wireless communications and so on.
Proposed Milestones
$250 USD - 250
Hi, I have made ofdm communication system in matlab. I can make your project system in simulink also. I have made GUI in communication systems also. I can submit your project in given 3 days in $150 in three milestones. If you award me your project, I shall thankful to you.
I have an MSEE specializing in DSP (time series, Speech) and Image Processing. I do my work in MATLAB.
Relevant Skills and Experience
MSEE
MATLAB
DSP
IMAGE PROCESSING
Proposed Milestones
$155 USD - delivery
Chat me the details not already given
I have well experienced in doing such kind of modulation technique like adaptive modulation,.........
Relevant Skills and Experience
matlab
Proposed Milestones
$166 USD - i will do my level best
complete and genuine work on time and detailed analysis will be provide along with documentation
Relevant Skills and Experience
matlab engineer
Proposed Milestones
$111 USD - initial amount for starting project
$111 USD - complete work with analysis
Additional Services Offered
$45 USD - for video on how to do it