I2c pwm controller jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    5,000 i2c pwm controller jobs found, pricing in USD

    ...Constraints:** - The vehicle must fit within a specified dimension of 250mm(W) x 250mm(D) x 250mm(H) and weigh no more than 1000g, excluding tiles. - The dimensions of domino tiles are 4.4cm x 2.7cm x 0.7cm - The vehicle must be fully autonomous, with no manual intervention allowed during the tile placement and triggering process. - Commercial sensors that interface via standard protocols such as I2C, SPI, or RS232 may be used for navigation and control. - No loose wires are permitted, we have to use pcb for all the connections (exceptions are there like motor to motor driver connection, battery to pcb connections,etc.) **Final Deliverables:** - A fully functional autonomous vehicle that meets the project specifications. I need this work done in 25-30 days. You can freely messa...

    $304 (Avg Bid)
    $304 Avg Bid
    5 bids

    I'm seeking a seasoned Java developer for an immediate project involving the construction of a Spring Boot filter. The main task centres on the creation and implementation of a filter for all incoming requests to the controller, specifically designed to combat XSS attacks and remove Zero Width Space (ZWSP) characters. Key Project Requirements: - Develop a Spring Boot application filter. - The filter must effectively handle and block all potentials XSS attacks. - The filter must efficiently remove all encountered ZWSP characters. - The developed filter must suitably plug into a Spring Boot application. - The filter should be designed to handle high networking traffic smoothly. Test Cases Require to Cover: - Scenarios of filtering XSS attacks. - Scenarios that deal with the re...

    $180 (Avg Bid)
    $180 Avg Bid
    1 bids

    I'm looking for a professional with in-depth experience in microcontroller programming and hardware design to create a controller that's capable of operating through GSM, with a primary function of controlling electrical devices. Scope of Work: - Development and programming of the controller. - Setting up GSM operations for the controller. Ideal Skills: - Proficient in microcontroller programming. - Extensive knowledge of GSM communication protocol. - Experience in designing and developing device controllers. - Ability to create detailed project proposals. Please include a detailed proposal which demonstrates a clear understanding of the project's requirements and how you plan to achieve them in your application. All aspects of the project including t...

    $2708 (Avg Bid)
    $2708 Avg Bid
    11 bids

    I'm seeking a skilled developer to create a Bluetooth S-Bus PWM module that would enable control of an RC vehicle from an Android application using a long-range class 1 Bluetooth receiver or transceiver W/Wifi Possibly using a ESP32 devise/module Key Components: - Create a Bluetooth S-Bus PPM module - Enable control from an Android application - Use long-range class 1 Bluetooth Rx or Transceiver Primary Functions on App: - Control of the vehicle's throttle - Control of the vehicle's steering Skills & Experience: - Expertise in Android App Development - Proficiency with Bluetooth Connectivity - Background in RC Vehicle Control System Development Turnaround: The ideal candidate will be able to deliver a fully functioning module within a month. The proposed dea...

    $160 (Avg Bid)
    $160 Avg Bid
    10 bids

    I'm seeking a diligent electronics expert proficient in Python, with experience in microcontroller, sensor usage, Arduino, PCB design, and RS485. Your responsibility will entail: - Developing STM32 based prototype using dev boards - Find best suited sensors for our needs (suggestions supplied) - Develop software for Main controller including 4G communication - Develop RS485 for the main controller to talk to at least 4 sensor boxes each with up to 15 sensors - Develop software for sensor boxes - Develop software for handling data form sensors such as temp, humidity, vibration, sound pressure, diff pressure, water detection, voltage, currency. - APIs for secure data storage on the Azure Mysql servercollection. - Effectively managing periodic data collection functions. -...

    $1500 - $3000
    Sealed NDA
    $1500 - $3000
    16 bids

    ...app, so expertise in Windows-based Kotlin software is essential. Basic topic / task: Programming a three-component application in Kotlin A “component” is understood to be a part of the program that exclusively covers a specific area of ​​responsibility of the overall application, functions independently and has defined interfaces. Examples of components: user interface (UI), business logic, controller, model, data connection. Any pattern can be selected as the application architecture, which covers the entire application divided into three logical components. It offers a pattern covered in class on, i.e. a layered architecture or MVC. Other patterns, e.g. MVP or MVVM, are also allowed. In terms of content, any application topic (“User Story”) should be s...

    $180 (Avg Bid)
    $180 Avg Bid
    13 bids

    ...app, so expertise in Windows-based Kotlin software is essential. Basic topic / task: Programming a three-component application in Kotlin A “component” is understood to be a part of the program that exclusively covers a specific area of ​​responsibility of the overall application, functions independently and has defined interfaces. Examples of components: user interface (UI), business logic, controller, model, data connection. Any pattern can be selected as the application architecture, which covers the entire application divided into three logical components. It offers a pattern covered in class on, i.e. a layered architecture or MVC. Other patterns, e.g. MVP or MVVM, are also allowed. In terms of content, any application topic (“User Story”) should be s...

    $65 (Avg Bid)
    $65 Avg Bid
    2 bids

    ...test/ debugging firmware that controls timing for a 4 dot wide printhead and (2) Write firmware that decodes marking from printer utilizing camera HDMI input. The final system will be a single Printer/ Print decoder that will print a special pattern and then decode the printed numeric pattern. The project requires seamless integration with some specific hardware components, which include: - Controller (Raspberry pi or similar platform), module with minimum 4 high speed outputs to drive 4 high speed valves in printhead (programming required) and will need at least 3 additional inputs and 3 additional inputs - printhead - NIR camera (Either USB or HDMI) - Display or touch screen (programming required) - Hardware capable of wireless and wired communications with other devices S...

    $1126 (Avg Bid)
    $1126 Avg Bid
    36 bids

    ...the hardware and firmware of our existing PIC24 boards. The scope of work includes: Hardware updates: - Addition of new interfaces - Implementation of new readers like RFID, Weight and other sensors on UART, SPI, I2C Firmware Changes: - Integration of the new reader interfaces - Implementation of bug fixes - Updating existing firmware to accommodate the new changes - Fulfillment of new requirements, which will vary based on specific projects The ideal candidate should have relevant experience in board-level design and firmware engineering, with proficiency in UART, SPI, I2C protocols and development using the PIC24 platform. The project may also involve creating support for additional sensors, enhancing communication capabilities and improving power management, ag...

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    5 bids

    I'm currently working on a robotics mechatronics project and need a PCB designer specializing in Ki...robotics mechatronics project and need a PCB designer specializing in KiCad software. You'll primarily be assisting me with: - Designing a PCB to provide a power supply for an existing general-purpose board based on the STM32H7 series. - Designing a PCB to read 4 AMS AS5047B rotary position sensors alongside 4 limit switches - Designing a PCB to control 4 BLDC motors with PWM Channel with Direction pins - Extracting an I2C port from the assembled PCB Your prior experience in these tasks would be a great advantage. A deep understanding of KiCad design software and STM32H7 series microcontrollers is a must for this project. Assist me in making my robotics mechatron...

    $495 (Avg Bid)
    $495 Avg Bid
    41 bids

    I am looking for a skilled electrical or mechanical engineer to develop a 12v motor speed controller specifically for an industrial machine. This controller will primarily serve to regulate and adjust the motor speed as needed. The equipment is designed to function in an outdoor environment and hence, the controller's design should take into account factors such as weather conditions and robustness. Key Requirements: - Proficiency in electrical/mechanical engineering - Experience with 12v motor speed controllers - Knowledge of industrial machinery operation - Ability to design devices for harsh outdoor environments Considering the project's specifications, an engineer with a background in designing control systems for outdoor industrial equipment will be a perfe...

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    12 bids

    I'm seeking a proficient developer with experience in both Arduino and Raspberry PI, to aid in porting my MIDI hardware controller with a touch screen interface to raspberry PI. The successful candidate will be experienced in Arduino, Python and Python UI, and have knowledge of PI input and output hardware IO messaging. Please see Arduino project here at GITHUB that you'll be effectively replicating on the PI: And video of later model I made so you can understand better what it is doing: I will work with you to port this over, with input of UI design (yes this visual look will be vague to start with, so we can orbit around and find the more ergonomic design - so there will

    $2359 (Avg Bid)
    $2359 Avg Bid
    46 bids

    As someone embarking on a project involving the PIC16F887 microcontroller, I'm seeking a highly competent developer to create a specific I2C driver for me. The main purpose of this driver is to support effective communication between PIC16F887 and other I2C compatible devices. Here are the key functionalities the driver should exhibit: - Strengthen the connection between PIC16F887 and DS1302 Real Time Clock (RTC). The right expert for this task would ideally have: - Extensive knowledge of microcontroller development boards - Strong background with PIC16F887 - Proven experience in creating I2C drivers - Detailed understanding of DS1302 RTC If you have these skills and experience and the enthusiasm to embark on this project, please bid!

    $26 (Avg Bid)
    $26 Avg Bid
    13 bids

    ...exhibit complex behavior. In this project, we will simulate an event-triggered impulsive control (ETIC) for a fractional order system. Event-triggered impulsive control is a control strategy that combines the benefits of traditional control theory with the advantages of impulsive control. It is particularly useful for systems that are sensitive to delays and have non-linear dynamics. In ETIC, a controller is designed to trigger an action at a specific event, such as the occurrence of a disturbance or the reaching of a threshold. This action is then used to adjust the system's state and control its behavior. The fractional order system that we will simulate is modeled using the Caputo fractional derivative, which is a well-known method for modeling non-linear systems. The s...

    $134 (Avg Bid)
    $134 Avg Bid
    15 bids

    For this project, I am seeking a highly skilled and experienced engineer familiar with programming PIC microcontrollers, specifically the PIC16F15323, in order to develop: 1- PWM functionalities. Key requirements: - The PIC16F15323 should have PWM output implementation on RC2 pin. - The desired frequency range of PWM output should be within the low frequency range, more specifically between 200Hz - 300Hz. - The duty cycle for the PWM output should be set to a constant and not require further adjustment after the initialization. 2 -HC-SR04 Ultrasonic Distance Sensor comunication every 1 second. Key requirements: - The PIC16F15323 should comunicate with HC-SR04 Ultrasonic Distance Sensor on RC5 (trigger)and RA4 (echo) pin to check the object distance every...

    $120 (Avg Bid)
    $120 Avg Bid
    24 bids

    This project includes the control of a simulated Air Handling Unit and Compensated heating circuit. The 230V AC ‘Air Handing Unit’ (AHU) fan in this project shall be controlled using a VSD. A green ‘AHU Fan Running’ light on the front panel shall indicate if the fan is running. The operator should be able to set a desired speed of the fan...should be on if 24v system is ok, this is determined by power supply being healthy. System should only be operational if ‘230v OK’ green light and ‘24v OK’ green light are activated on the front panel. Equipment VSD Temperature sensor x2 4-20mA Actuator x3 ESTOP button for fan Isolator Switch Variable res pot x2 Panel Switches x3 Lights x6 Mains Isolator Unitronic V570 HMI Unitronic V200-18-E3XB Contr...

    $233 (Avg Bid)
    $233 Avg Bid
    15 bids

    I'm seeking an adept professional to create an Nginx Controller that is compatible with both Azure Kubernetes and Google Kubernetes. While I left the questions regarding cloud platform selection and custom vs existing implementation unanswered, I am open to suggestions and guidance on these subjects. Key Features Desired: - Load balancing - SSL/TLS termination - Traffic routing The ideal freelancer for this project would be someone experienced in the creation and implementation of Nginx Controllers, familiar with both Azure Kubernetes and Google Kubernetes platforms. Strong communication skills are a plus, as the project may require complex decision-making and problem-solving.

    $70 (Avg Bid)
    $70 Avg Bid
    7 bids

    Im getting this Error . somebody is familiar? [unknown error: Chrome failed to start: exited abnormally. (unknown error: DevToolsActivePort file doesn't exist) (The process started from chrome location /usr/bin/google-chrome is no longer running, so ChromeDriver is assuming that Chrome has crashed.)

    $742 (Avg Bid)
    $742 Avg Bid
    18 bids

    options = Selenium::WebDriver::Chrome:: ``` class ProjectsController < ApplicationController def method options = Selenium::WebDriver::Chrome:: Selenium::WebDriver::Chrome::Service.driver_path = "/Users/XXXX/Applications/Chrome " options.add_argument('--headless') driver = Selenium:: :chrome, options: options end end ``` Selenium::WebDriver::Error::SessionNotCreatedError (session not created: This version of ChromeDriver only supports Chrome version 114 Current browser version is 122.0.6261.129 with binary path /Applications/Google Chrome): Version Compatibility Problem and so on

    $172 (Avg Bid)
    $172 Avg Bid
    15 bids

    I'm seeking an experienced programmer to create a PWM program using PIC18F26K22 in MPLAB. The objective is to generate analog signals specifically sawtooth wave. Despite skipping the question on the preferred frequency range, an adept freelancer should deliver: - Sound understanding and working knowledge of PWM programming - Familiarity with MPLAB for PIC microcontrollers - Proficiency in generating different types of waveforms especially sawtooth wave Your strong background in microcontroller programming will greatly benefit this project. If you can provide any samples of previous similar work, it will add credibility to your bid. Looking forward to professionally executed work. Thank you.

    $108 (Avg Bid)
    $108 Avg Bid
    12 bids

    ...onsControllerAdminhtmlIndexIndex Incompatible argument type: Required type: MagentoBackendAppMagentoBackendAppActionContext. Actual type: MagentoAsynchronousOperationsControllerAdminhtmlIndexMagentoBackendAppActionContext; File: /home/mytoiletsparesco/public_html/vendor/magento/module-asynchronous-operations/Controller/Adminhtml/Index/ MagentoAsynchronousOperationsControllerAdminhtmlNotificationDismiss Incompatible argument type: Required type: MagentoBackendAppMagentoBackendAppActionContext. Actual type: MagentoAsynchronousOperationsControllerAdminhtmlNotificationMagentoBackendAppActionContext; File: /home/mytoiletsparesco/public_html/vendor/magento/module-asynchrono...

    $38 (Avg Bid)
    $38 Avg Bid
    18 bids

    I am eagerly looking forward to developing an interactive dice controller which will be used with the 抖音语音直播 (Douyin Voice Live) interface. Main Features: - Unlike typical dice systems, the controller will generate dice rolls based on user commands. - Primarily, dice roll controls will be managed through button inputs. - Real-time display of dice roll results is a mandatory feature. Partial Determinants: - The complexity levels of button controls for dice rolls are yet to be decided. This aspect of the project is open to discussion during the development phase. Ideal Profile: - A self-starter with bountiful experience in creating engaging, interactive systems. - Fluent in Chinese, as the platform will be integrated in Douyin. - Has an understanding of real-time co...

    $4377 (Avg Bid)
    $4377 Avg Bid
    27 bids

    I need support to setup inside UNITY my VIVE Tracker. I already have the UNITY project I have the VIVE Tracker 2.0. I have 2 lighthouses working correcty I correctly install STEAM VR and the items (Oculus, Vive Tracker and lighthouses) are correctly working in it. I have problem to setup the Vive controller inside the Unity project and make them working (I connect them to the foot of a body and wanto to move them) - Need someone with the hardware at disposal, so we can follow the steps at same time - Need someone wiht already experience in this task Please provide fix price. What I need is document with steps and a call to guide me in setup.

    $133 (Avg Bid)
    $133 Avg Bid
    5 bids

    ...of charge/stored energy and makes appropriate decisions. If the battery level is low or the battery charge decreases, the robot will head to the wireless charging station. When charging is complete, the robot will return on its way. The left and right movements of the robot are controlled by the respective left and right turn movements, clockwise or counterclockwise, controlled by the Arduino controller and powered by the motor driver. When the robot reaches the respective platform or required destination, the user will enter the password to open the lid of the box containing the blood samples. If an incorrect password is entered by the user, then the RED light turns on. When a correct password is entered by the user, the GREEN light will turn on, the buzzer will beep, and the bl...

    $291 (Avg Bid)
    $291 Avg Bid
    23 bids

    I require a trained network engineer to navigate the configuration of my Aruba 9012 controller and map it across my existing Cisco devices. - Key Deliverables: 1. Study the configuration details of the Aruba 9012 controller or the existing Cisco device which I will provide. 2. Configure the Aruba 9012 controller to function seamlessly with the existing Cisco devices in an office setting. - Skills and Experience: I need someone experienced in configuring Aruba and Cisco devices in an office environment. An understanding of the integration of different devices is necessary. Please note, this project involves configuring one Aruba 9012 controller and one Cisco device. Proficiency in dealing with both the above-mentioned devices is pivotal.

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    9 bids

    I aim to transform my Cameo CLPFLAT1RGB10IR into a visual metronome that I could control vi...light with each tap on the footswitch, setting an accurate pace in a white light display. Key Requirements: - Configure the footswitch to control the light's flash speed. - Method to be implemented: wired connection. - Hardware controller is desired but specific device is undefined. - Ensure light flashes in white color. Freelancers with experience in: - Hardware and software interfacing - Device configurations via both wire and code - Creating a user-friendly interface - Not restricted but proficiency in works involving Arduino, Raspberry Pi, and MIDI controller would be useful. Your expertise is needed to transform a conventional light into a unique visual device tha...

    $23 (Avg Bid)
    $23 Avg Bid
    3 bids

    I am looking for a professional who can develop a controller for a 24V DC VSD pump and a 24V AC (0-10V) mixing valve. This setup requires an analog voltage control interface (0-10V). The contractor needs to have: - Experience with control system design, particularly with mechanical systems. - Understanding of analog voltage control. - Hands-on experience with the specified pump and valve models. Technical knowledge of these components is key. This project will entail interfacing control systems with the selected hydronic pump and mixing valve models. Prior experience with similar projects is a plus.

    $53 / hr (Avg Bid)
    $53 / hr Avg Bid
    22 bids

    I am looking for an expert in embedded Linux, specifically Yocto Poky, to make some essential customizations to my BeagleBone Black device. The project includes: • Kernel configuration • Bootloader customization • Device driver integration In-depth experience related to WiFi modules, Dlpdlcr2000EVM Driver, I2C, I2S, and SPI Drivers are crucial for this task as these are the specific hardware components we will be working with. Apart from these, I would also like to introduce some changes to the user interface for improved navigation and accessibility. Professional experience in UI customization would be beneficial. I am expecting reliable, high-quality work from a freelancer with profound knowledge of these specific areas. A strong history of similar past project...

    $735 (Avg Bid)
    $735 Avg Bid
    7 bids

    ...registered in a simple IP list. Then every message from one client should be automatically re-sent over Wi-Fi/UDP to all registered IP-s. There is no need to confirm the messages in either way. Consequently it seems that UDP is the right protocol to be used (to be confirmed by the contractor). Additionally the component should implement low-level basic RX and TX interfacing over one UART and one I2C port. The target HW environment will be Raspberry Pi Zero 2W with Linux. The sending and receiving code should execute possibly in the background in order to allow to use the host Linux platform to perform other processing in parallel. The component should be 2-way and use simple circular queues to buffer RX and TX messages. I have attached a draft, base class Qued with a very s...

    $526 (Avg Bid)
    $526 Avg Bid
    21 bids

    As an owner of a new project, I require a highly skilled professional experienced with ASP.NET, specifically with the Model-View-Controller (MVC) framework. Since I didn't specify any version for this application, a wide range experience in ASP.NET Core 1.x, 2.x, and 3.x is ideal. Your specific tasks will be: • Implementing User Authentication and Authorization • Managing Database Operations • Enhancing Client-side Functionalities Include in your application your relevant experience. Show that you've tackled similar projects before and successfully implemented an MVC application. I'm after a robust, efficient, and secure implementation. Looking forward to your applications!

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    10 bids

    ...INSERTED TO FOOL BOTS AND REPORT THEM TO FREELANDER - Cisco Switch, Netgear Firewall, Ubuntu 2001, Nokia 3210, Windows Nintendo, Sega Monitoring, Potato Technology, Service Now, Juniper Fake Firewall, Whiskey Router ** I need to create a timesheet website for my business. Login - Working with Microsoft Active Directory, the page will need to verify the username and password against a domain controller. Menu - This page will present the user with two options 1) Enter Timesheet 2) Review Timesheets Enter Timesheet - This page should present the user with their details from active directory " Hello, Welcome ACTIVE DIRECTORY DISPLAY NAME, Name: Active directory name Email: Active directory email Phone: Active directory telephone number" They should be presented w...

    $461 (Avg Bid)
    $461 Avg Bid
    61 bids

    I need a PCB with 7 5x7 displays with output via a DS Olimex type connector. It will be connected to an ESP32 board to control these displays and show alphanumeric characters. I need a quote for designing the circuit and the PCB layout in Altium. And I need a separate quote for the firmware to use on...and show alphanumeric characters. I need a quote for designing the circuit and the PCB layout in Altium. And I need a separate quote for the firmware to use on the ESP32 for control. I was thinking of using 74hc595D for controlling the displays by multiplexing. The power input for the display board needs to be 12V, and include a circuit to control the current and keep the LEDs on or control via PWM from the ESP32; I'm open to the designer's suggestion. I'm looking...

    $26 (Avg Bid)
    $26 Avg Bid
    5 bids

    I'm looking for an expert in off-grid systems to create a battery-powered solution for a refrigerator and an automatic gate system. - The system will need to be designed to support less than...use from market ones ** Load: ac equipaments with high peak current : Load = 1/4HP ou 1/2HP (i.e: Refrigerator / Freezer / Automatic Gate) Need to have display output to show status of battery charge and input status (battery or AC) Need to have a button to manual switch from ac to battery Need to have fuse to protection Keep in mind, it has high current peak at load start! Prefer NOT micro-controller (except battery monitoring system) - Use Analog if possible! Need: - PROJECT - SCHEMATIC (prefer - not mandatory - easyEDA) - PCB (prefer - not mandatory - easyEDA) - Bill of materials ...

    $443 (Avg Bid)
    $443 Avg Bid
    18 bids

    I am seeking an experienced Altium designer to create a small PCB for a battery-powered hand heater - powerbank device. Features: - Small sizes of PCB: 16×75mm (it could be double-sided) - PCB work as BMS for lithium battery 3.7V, 4A. - Charge battery with 5v, 2A. - Read temperature via thermistor (as example NTCLE100E3471JB0) - Include programmed controller with custom program. - Preset temperature programs: (40, 50, 60 °C), which users can adjust using a physical button. - Has 5 LEDs that indicate battery status and chosen program. - As powerbank support QC 3.0, Apple devices and Samsung devices. - Ideal one USB type C port for charging either phones and PCB battery. Detailed info for chips and components you can find in attached PDF Ideal Skills: - Experience with...

    $158 (Avg Bid)
    $158 Avg Bid
    20 bids

    I'm looking for a technically proficient embedded engineer in Ho Chi Minh City, Vietnam. The project involves advancing a motion controller (PID position control) that is currently at a functional prototype should have experience in embedded system development but also possess specific skills in in-circuit debugging and a thorough understanding of the Modbus(485) protocol. I'm particularly interested in candidates who are recent graduates with a strong analytical mindset and a passion for embedded systems. Project Status: Advanced stage with a functional prototype firmware already developed. Immediate focus on refinement, debugging, optimization, and real-world application testing. Applicant must be located in Ho Chi Minh City, Vietnam. Qualifications: Strong s...

    $157 (Avg Bid)
    $157 Avg Bid
    12 bids

    I need a proficient user of GT-Power software to help me understand the throttle controller model for gasoline engines. As a means to improve my grasp on this subject, I request a comprehensive simulation and analysis aimed at: - Gaining insights on fuel consumption, emissions, and power output under varying loads. - Studying the impact on engine performance when set to 50% load and 20% load conditions. The ideal freelancer will have a comprehensive understanding of GT-Power software and gasoline engines, with a focus on throttle control. They should be able to extract in-depth understanding of fuel consumption, emissions, and power output under different load conditions. The intended aim is to improve fuel efficiency, reduce emissions, and optimize power output based on the insig...

    $18 - $151
    $18 - $151
    0 bids

    I urgently need someone experienced to install a Kamailio session border controller with a webgui on a Debian operating system. Your familiarity with Debian and Kamailio is essential. Key tasks include: - Kamailio SBC installation on Debian - Setting up a functional webgui - Provision of post-install maintenance guide As the main function of the SBC wasn't specified, a general SBC setup is anticipated. However, we may discuss specific requirements before or during the project. Please respond promptly, as this is time-sensitive.

    $354 (Avg Bid)
    $354 Avg Bid
    9 bids

    ...required: - Open source SAMBA software suite (latest compatible version for Directory Services and Domain Control implementation). - Installation and commissioning of the setup at the existing hardware) and about 1400 endpoint device setup for Directory Services / Domain Control access and use (Details given in Annexure-I). This shall include the following: o Directory Services and Domain Controller implementation using the latest version of SAMBA software suite conforming to all the requirements. o Directory Customization including creating user groups and directory structure o Group Policies creation based on requirement. o Kerberos configuration as the authentication protocol. o DNS backend configuration as required. o NTP synchronization as required. o SMB/CIFS imple...

    $6860 (Avg Bid)
    $6860 Avg Bid
    4 bids

    ...specialist capable of configuring a NetApp 6600 storage system to effectively manage data storage. Specifically, the task involves: Netapp storage not providing any software interface for making raid configuration and not allowing for a software download from its official web site - connecting to the device throw the netapp software and configuring a raid 5 - i will provide a pc connected to the controller ethernet port with anydesk remote access - very important note I faild to find any proper software or a web interface for connecting to that device - previous experience with such a case is a must . The successful bidder must have demonstrated experience with netapp storage configuration and must have a software for connecting to the device that he used before in a sim...

    $200 (Avg Bid)
    $200 Avg Bid
    1 bids

    I am looking for a seasoned professional who can develop a BLDC (Brushless DC) motor control system for my industrial automation project. Requirements: * Experience in BLDC motor controls is essential. * Must be proficient in serial communication systems, particularly UART, SPI, and I2C. * Knowledge of optical encoders is paramount as this will be our preferred feedback mechanism. * Past experience in industrial automation projects will be highly beneficial. * Familiarity with safety and regulatory standards in the industrial automation sector is an added advantage. By the completion of this project, the BLDC motor control should work seamlessly with the rest of our system, supporting effective and efficient operation of our industrial processes.

    $118 (Avg Bid)
    $118 Avg Bid
    15 bids

    Project Description: We are seeking a skilled developer proficient in UISP (UniFi Network Controller Software) with a strong understanding of PHP, communication with MikroTik OS via API, and PPPoE protocols. The project entails creating a custom third-party module for UISP that integrates seamlessly with PHP and allows communication with MikroTik OS through its API. Key Requirements: 1. UISP Knowledge: The ideal candidate should possess in-depth knowledge of UISP (UniFi Network Controller Software) to develop a custom third-party module that aligns with its architecture and functionalities. 2. PHP Skills: Proficiency in PHP programming language is essential for the development of the module. The developer should be capable of writing clean, efficient, and maintainable PHP...

    $131 (Avg Bid)
    $131 Avg Bid
    19 bids

    I am in need of an experienced PLC programmer, specifically experienced in working with the Honeywell HC900 Controller. I am unsure about the programming language to be used for this project and would need guidance on that matter. Requirements: - Proficient in PLC programming - Familiarity with Honeywell HC900 Controller - Ability to guide on the use of the best programming language for the task - Expertise in developing SCADA based interfaces Your responsibility will be to program the PLC while helping me understand the programming language used and ensuring compatibility with a SCADA based interface. Those interested are expected to have a proven track record of working with similar projects. Your proposal should include your experience and projects you have worked on be...

    $343 (Avg Bid)
    $343 Avg Bid
    11 bids

    The purpose of this project is to create a Python interface for a ZKTECO IP Controller, with the end goal of monitoring employees. Specifically, I need someone with expertise in Python and SDK interfacing to help obtain push events from the ZKTECO IP Controller. Your focus should be on: -Gathering User Details: I want the program to receive specific user details for my monitoring objectives. -Experience with ZKTECO IP Controllers: An insight into how these controllers work and how to effectively retrieve user data from them is ideal. Remember, this is a tool for employee monitoring, so the ability to provide real-time consumer data securely and efficiently, prioritizing the user details, is crucial. Your skill set should include proficiency in Python programming and work...

    $145 (Avg Bid)
    $145 Avg Bid
    9 bids

    I am seeking an experienced Altium designer to create a small PCB for a battery-powered hand heater - powerbank device. Features: - Small sizes of PCB: 16×75mm (it could be double-sided) - PCB work as BMS for lithium battery 3.7V, 4A. - Read temperature via thermistor (as example NTCLE100E3471JB0) - Include programmed controller with custom program. - Preset temperature programs: (40, 50, 60 °C), which users can adjust using a physical button. - Has 5 LEDs that indicate battery status and chosen program. - As powerbank support QC 3.0, Apple devices and Samsung devices - Ideal one USB type C port for charging either phones and PCB battery Detailed info for chips and components you can find in attached PDF Ideal Skills: - Experience with temperature regulated gadgets -...

    $172 (Avg Bid)
    $172 Avg Bid
    19 bids

    Modification of Solar Charge Controller circuit and correction of Board if any

    $15 (Avg Bid)
    $15 Avg Bid
    6 bids

    I am looking for a competent developer with experience creating mobile applications and integrating wireless hardware systems. Your task will be to build a mobile app that allows me to control and monitor a wireless water pump and tank system. Key functionalities I'm interested in include: - Real-time visual representation of water levels - Statistics related to water usage - Customizable settings which include: - Pump timer settings - Notification settings - Water usage threshold settings Previous experience in developing similar projects, especially apps that interact with hardware, would be advantageous. Thorough knowledge of best practices for mobile app development, user-interfaces, and data visualization required.

    $803 (Avg Bid)
    $803 Avg Bid
    49 bids